calculate-loan

01 Loan payments

VA Refinance Calculator with Break Even Point

Calculator No. 01-26647 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

Estimate for education, not financial advice. The result follows from the numbers you enter and the formula shown. It is not a quote or an offer, and it does not include fees, taxes or insurance unless the calculator asks for them. Ask your lender for the exact figures.

This VA refinance calculator works out your new monthly payment and the total interest saved over the life of the loan, then uses those numbers to find your break-even point — the number of months it takes for the monthly savings to cover the closing costs of the refinance. You enter your current loan balance, current interest rate, new interest rate, new loan term, and the total closing costs; the calculator returns your new payment, total interest paid, monthly savings, and break-even months.

Formula

The calculator uses the standard fixed-rate mortgage payment formula to compute both the current and new monthly payments. The monthly payment for a loan is:

PMT = P × (r / 1200) / (1 − (1 + r / 1200) ^ (−n))

  • P = loan balance (principal) in dollars
  • r = annual interest rate (APR) in percent per year
  • n = number of monthly payments (term in years × 12)

The break-even point is then:

Break-even months = Closing costs ÷ (Current monthly payment − New monthly payment)

All payments are rounded to the nearest cent before calculating savings and totals, matching how a lender would quote them.

Worked Example

Using the default values: loan balance $200,000, current rate 4.5%, new rate 3.5%, new term 30 years, closing costs $6,000.

  1. Current monthly payment: 200000 × (4.5 / 1200) / (1 − (1 + 4.5 / 1200) ^ (−360)) = 1013.37 (rounded)
  2. New monthly payment: 200000 × (3.5 / 1200) / (1 − (1 + 3.5 / 1200) ^ (−360)) = 898.09 (rounded)
  3. Monthly savings: 1013.37 − 898.09 = 115.28
  4. Break-even: 6000 / 115.28 = 52.0 months (about 4.3 years)
  5. Total interest on current loan: 1013.37 × 360 − 200000 = 164,813.20
  6. Total interest on new loan: 898.09 × 360 − 200000 = 123,312.40

So with these inputs, the new payment is $898.09, you save $115.28 per month, and it takes 52 months to recover the $6,000 in closing costs.

Assumptions

  • The loan is a fixed-rate mortgage; the rate stays constant for the entire term.
  • Payments are made monthly at the end of each month.
  • Interest compounds monthly at APR / 12.
  • The current loan is assumed to have the same remaining term as the new loan for the comparison (this is a simplification; see below).
  • Closing costs are paid upfront and are not rolled into the new loan balance.
  • This calculator does not include property taxes, homeowners insurance, PMI, VA funding fees, or any other fees unless you add them to the closing costs input.

How to Read the Break-Even Point

The break-even point tells you how long you need to stay in the home (and keep the new loan) for the monthly savings to offset the upfront costs. If you plan to move or refinance again before that number of months, the refinance may not pay off. If you plan to stay longer, the savings after break-even are yours to keep.

Note that this calculator compares the new loan to the current loan over the same term. In reality, your current loan may have fewer years left. For example, if you are 10 years into a 30-year mortgage, your remaining term is 20 years. Refinancing to a new 30-year loan resets the clock, which can lower the payment but add years of interest. The break-even calculation here still works for the monthly cash-flow comparison, but it does not capture the extra interest you might pay because of the longer term.

Common Mistakes and Misconceptions

  • Ignoring the remaining term: Comparing your current payment (which may be based on a 20-year remaining term) to a new 30-year payment is not apples-to-apples. Use the same term for both, or use a calculator that allows different remaining terms.
  • Forgetting the VA funding fee: Many VA refinances include a funding fee (unless you are exempt). That fee is part of closing costs and should be included in the costs input.
  • Rolling costs into the loan: If you finance the closing costs, your new loan balance increases, which changes the payment and the break-even. This calculator assumes you pay costs upfront.
  • Using the interest rate instead of APR: The APR includes some fees and reflects the true cost of borrowing. Use the APR for a more accurate comparison.
  • Thinking break-even is the only factor: Lower monthly cash flow can help with budgeting, but you might pay more total interest over a longer term. Consider both monthly savings and total interest.

When to Use This Calculator

Use this tool when you are considering a VA Interest Rate Reduction Refinance Loan (IRRRL), also known as a VA streamline refinance, or any VA cash-out refinance. It is most useful when you want to see if the rate drop justifies the closing costs. It is also helpful for comparing two different refinance offers — enter the costs and rates for each offer and compare the break-even months.

Remember that VA program rules, such as the funding fee percentage, loan limits, and occupancy requirements, are not modelled here. Check with your lender or the VA for current program details.

Alternatives and Related Calculations

If you are not sure about refinancing, consider these related calculations:

  • No-cost refinance: Some lenders offer a higher rate in exchange for covering closing costs. Compare the break-even of that option vs. paying costs upfront.
  • Recast: If you have a lump sum, you might recast your current loan to lower the payment without refinancing.
  • Extra payments: Making extra principal payments can shorten your loan term and save interest without any closing costs.
  • Cash-out refinance: If you need cash, the break-even calculation is different because you are increasing your loan balance. This calculator is not designed for that.

Frequently Asked Questions

What is a good break-even period for a VA refinance?

There is no universal “good” number, but many people aim for a break-even of 2 to 3 years (24–36 months) because that is a common expected time in a home. However, your own situation matters: if you plan to stay longer, a longer break-even might still be acceptable. The calculator gives you the exact number based on your inputs.

Does the VA funding fee affect the break-even?

Yes. The VA funding fee is a percentage of the loan amount and is typically financed into the loan unless you pay it upfront. If you finance it, the loan balance increases, which raises your payment and reduces your savings. If you pay it upfront, include it in the closing costs input. Either way, it affects the break-even.

Can I refinance a VA loan to a non-VA loan?

Yes, you can refinance a VA loan into a conventional or other loan type, but you would lose the VA benefits. This calculator works for any fixed-rate refinance, but the VA-specific rules (like the funding fee) only apply if you stay in a VA loan.

What if my new payment is higher than my current payment?

If the new rate is higher or you extend the term, the monthly payment might go up. In that case, the monthly savings will be negative, and the break-even formula will show “Cannot compute” because you are not saving money each month. In that scenario, a refinance would only make sense for other reasons, like cash-out or changing loan terms, but not for monthly savings.

How do I know my current loan balance and rate?

Your current loan balance is on your most recent mortgage statement. Your current interest rate is also on the statement, or you can check your original loan documents. If you are not sure, contact your loan servicer.

Should I include prepayment penalties in closing costs?

Yes, if your current loan has a prepayment penalty, that cost is part of the total cost of refinancing and should be added to the closing costs input. Most VA loans do not have prepayment penalties, but check your loan documents.

The result from this calculator is an estimate based on the inputs you provide; your lender’s official loan disclosure will give the exact figures, including all fees and the final APR.

Related

Formula used
in p | Current loan balance | $ | 200000 | 1 | 100000000
in r1 | Current interest rate (APR) | % | 4.5 | 0.01 | 100
in r2 | New interest rate (APR) | % | 3.5 | 0.01 | 100
in yrs | New loan term | years | 30 | 1 | 50
in costs | Total closing costs | $ | 6000 | 0 | 1000000
out pmt2 | New monthly payment | $ | p * (r2 / 1200) / (1 - (1 + r2 / 1200) ^ -(yrs * 12)) | 2
out pmt1 | Current monthly payment | $ | p * (r1 / 1200) / (1 - (1 + r1 / 1200) ^ -(yrs * 12)) | 2
out savings | Monthly savings | $ | pmt1 - pmt2 | 2
out int2 | Total interest (new loan) | $ | pmt2 * yrs * 12 - p | 2
out int1 | Total interest (current loan) | $ | pmt1 * yrs * 12 - p | 2
out breakeven | Break-even point | months | costs / (pmt1 - pmt2) | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.

More in this section

The whole Loan payments section →