This calculator works out how many months it takes for the monthly savings from a VA Interest Rate Reduction Refinance Loan (IRRRL) to cover the closing costs, which is the break-even point. You enter your current payment, new payment, and total refinance costs, and you get the number of months until you start saving money.
Formula
Break-even months = Total closing costs ÷ (Current monthly payment − New monthly payment)
Where:
- Total closing costs = all fees you pay at closing, in dollars ($)
- Current monthly payment = your existing VA loan payment, in dollars ($)
- New monthly payment = the projected payment on the new IRRRL, in dollars ($)
The result is in months. If the new payment is not lower than the current payment, the denominator is zero or negative, and the calculator shows “Cannot compute” because there is no break-even point to calculate.
Worked Example
Using the default values: current payment = $1,200, new payment = $1,050, closing costs = $4,000.
- Monthly savings = $1,200 − $1,050 = $150
- Break-even months = $4,000 ÷ $150 = 26.666… months
Rounded to one decimal, the break-even is 26.7 months. This means that after about 2 years and 3 months, the cumulative savings from the lower payment will equal the $4,000 you paid in closing costs. From that point on, the savings are yours to keep.
Assumptions
- The interest rate is fixed and the payment difference stays constant each month.
- You make the same monthly payment every month, with no extra payments or prepayments.
- Closing costs are paid in full at closing, not rolled into the loan balance.
- This calculator does not include property taxes, insurance, PMI, or any other escrow items unless they are part of the payment figures you enter.
- It does not model the VA funding fee, which may be financed or waived depending on disability status – check with your lender.
How the VA IRRRL Works
The VA Interest Rate Reduction Refinance Loan, often called an IRRRL or “VA streamline,” is a refinance option for existing VA loans. Its main purpose is to lower your interest rate and monthly payment, and it generally requires less documentation than a full refinance because it uses your original loan’s eligibility. The break-even calculation is the same as for any refinance: you compare the upfront costs to the ongoing monthly savings.
Note that the VA does not require a credit check or appraisal for an IRRRL, but the lender may still charge closing costs. Those costs can include an origination fee, discount points, title insurance, recording fees, and the VA funding fee (which is 0.5% of the loan amount for a regular IRRRL, unless you are exempt due to a service-connected disability). The exact amount varies by lender and location, so you need the actual cost estimate to use this calculator accurately.
Why Break-Even Matters
The break-even point is the moment when the total cost of refinancing is offset by the total savings from the lower payment. If you plan to stay in the home longer than the break-even period, you will likely come out ahead. If you plan to move or sell before that point, you may not recover the closing costs. This is a key number to consider, but it is not the only one.
For example, if your break-even is 26.7 months and you plan to stay for 5 years (60 months), you would save about $150 per month for 33 months after break-even, which is roughly $4,950 in net savings. If you plan to move in 18 months, you would lose money because you would not have reached break-even.
How to Use This Calculator
To get a realistic break-even estimate, you need three numbers:
- Current monthly payment – look at your most recent mortgage statement.
- New monthly payment – ask your lender for a loan estimate that shows the projected payment, including principal, interest, and any escrow items (if you include escrow in both payments, the comparison is more accurate).
- Total closing costs – this is the sum of all fees listed on the loan estimate, plus any points you pay, but do not include prepaid interest or escrow deposits that you would pay anyway.
Enter those numbers and the calculator gives you the break-even in months. A shorter break-even is generally more favorable, but you should also consider how long you expect to stay in the home.
Common Mistakes and Misconceptions
One common mistake is comparing only the interest rate, not the payment. A lower rate usually means a lower payment, but if you roll closing costs into the loan balance, the payment may not drop as much as expected. Use the actual projected payment, not the rate.
Another mistake is ignoring the funding fee. The VA funding fee for an IRRRL is 0.5% of the loan amount, unless you are exempt. If you finance that fee, it adds to the loan balance and reduces your monthly savings. Include it in the closing costs if you pay it upfront, or note that your payment already reflects it if you finance it.
A third misconception is that a lower payment always means a good deal. If the break-even is very long (say, 10 years) and you might move in 5, you would lose money. Also, refinancing can extend your loan term, which means you might pay more total interest over the life of the loan even if the monthly payment is lower.
Comparing Refinance Options
This break-even calculator is useful for comparing an IRRRL to your current loan, but it does not compare an IRRRL to a cash-out refinance or a conventional refinance. A cash-out refinance lets you take equity out, but it usually has a higher rate and different costs. A conventional refinance may have different eligibility and costs. The break-even formula works the same way, but you must input the correct payment and cost figures for each option.
For a more complete picture, consider the total interest you would pay over the remaining term. A lower payment with a longer term can result in more total interest. Use a loan amortization calculator to see the lifetime cost.
Frequently Asked Questions
What is a good break-even period for a VA refinance?
There is no universal “good” number because it depends on your plans and costs. Many people aim for a break-even within 2 to 3 years, but that is a preference, not a rule. The key is to compare the break-even to how long you expect to stay in the home.
Should I include the VA funding fee in closing costs?
Yes, if you pay it out of pocket, include it in the total closing costs. If you finance it (roll it into the loan), your new payment will already be higher, so the payment difference you enter will reflect it. Either way, make sure the funding fee is accounted for somewhere.
Can I refinance a VA loan that I already refinanced before?
Yes, you can do multiple IRRRLs, but there are rules about how soon you can do another one and how much benefit you must gain. The VA generally requires that the new loan have a lower interest rate or a lower payment, and you must have made at least six payments on the current loan. Check with your lender for current requirements.
What if my new payment is higher than my current payment?
If the new payment is higher, there is no monthly savings, so the break-even formula does not apply. An IRRRL is typically intended to lower your payment, but if you are extending the term or taking cash out (which is not allowed with a standard IRRRL), the payment could go up. In that case, refinancing might still make sense for other reasons, but you would not break even on monthly savings.
Does the break-even calculator account for taxes and insurance?
Only if you include them in the payment figures you enter. If your current payment includes escrow for taxes and insurance, and your new payment also includes them, then the difference is meaningful. If you exclude them from both, the comparison is still valid, but it ignores those costs. For accuracy, use the full monthly payment as shown on your statement or loan estimate.
The result from this calculator is an estimate based on the numbers you enter. Your lender’s official loan disclosure will show the exact costs and payment, so use that for final decisions.
Related
Formula used
in pmt_old | Current monthly payment | $ | 1200 | 1 | 100000 in pmt_new | New monthly payment | $ | 1050 | 1 | 100000 in costs | Total closing costs | $ | 4000 | 0 | 100000 out months | Break-even months | months | costs / (pmt_old - pmt_new) | 1 out savings | Monthly savings | $ | pmt_old - pmt_new | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.
More in this section
- Jet Fuel Cost per Gallon? Prices and What Affects Them
- High Amount Personal Loan Interest Rate Calculator$405.53
- Fuel Costs and Home Loans: How They Connect$405.53
- Fuel Costs Perth: Prices, Factors and Savings
- Cost of Fuel: Calculate Your Trip’s Fuel Expense$42.00
- Car Quote for a Used-Car Trade-In: What It Means