A refinance savings calculator compares the monthly payment and total interest on your current loan with those on a replacement loan, then accounts for refinancing costs to estimate a break-even point. Enter the current balance, current APR and remaining term, plus the new APR, new term and costs; the results are estimates, not a prediction of lender approval or exact closing figures.
Formula
The calculator estimates interest under each loan’s level-payment schedule, then subtracts the refinancing costs from the difference:
- Monthly rate: r = APR / 1200.
- Monthly payment: M = B × r / [1 − (1 + r)−n].
- Total interest estimate: I = M × n − B.
- Net savings estimate: Icurrent − Inew − costs.
- Simple break-even months: costs / (current payment − new payment).
B is the balance in dollars, APR is the annual percentage rate, and n is the term in months (years × 12). The current-loan inputs represent its remaining term, not its original term. The new-loan balance is assumed equal to the current balance; costs are treated as an out-of-pocket expense and are not added to the new balance. The payment-difference output is the new monthly payment minus the current payment, so a negative result means the modeled new payment is lower. The simple break-even output is meaningful as a time-to-recover-costs estimate when the current payment exceeds the new one; a zero or negative payment reduction cannot produce a useful positive break-even period.
The net-savings output compares modeled interest across the entire remaining current term and the entire new term, then subtracts costs. Because the terms can differ, this compares different payoff timelines; it is not a like-for-like measure of cost over the same number of months. The formula uses the full-precision level payment, rather than rounding each payment to cents, to keep the comparison compact. Actual statements and lender disclosures may use rounded payments and more detailed balances.
Worked Example
Using the calculator’s defaults: current balance $250,000; current APR 7%; current remaining term 25 years; new APR 6%; new term 20 years; refinancing costs $5,000.
- Convert the terms to months: 25 × 12 = 300 months; 20 × 12 = 240 months.
- Current monthly rate is 7 / 1200 = 0.0058333. Current payment is approximately $1,767.21 per month. Total modeled interest is $1,767.21 × 300 − $250,000 = $280,163.00.
- New monthly rate is 6 / 1200 = 0.005. New payment is approximately $1,791.08 per month. Total modeled interest is $1,791.08 × 240 − $250,000 = $179,859.20.
- Net estimated savings are $280,163.00 − $179,859.20 − $5,000 = $95,304.00.
- The monthly-payment difference is $1,791.08 − $1,767.21 = $23.87. The new payment is higher, so dividing costs by a monthly payment reduction does not give a meaningful positive break-even point in this example.
The first result is based on the calculator’s displayed formula and full-precision payments; the rounded figures shown in the steps can cause a small difference when independently multiplied. The numbers illustrate why a lower APR does not automatically mean a lower monthly payment: the new term here is shorter.
Assumptions
- Both loans have fixed APRs and level monthly payments for their modeled terms.
- Payments are made monthly, with the first payment one month after the loan begins.
- Interest compounds monthly at APR divided by 12.
- The new starting balance equals the current balance; costs are paid separately, not financed.
- Taxes, insurance, escrow, mortgage insurance, changing rates, prepayment charges and other loan-specific charges are not included.
How to Interpret Refinance Savings
A positive net-savings estimate means the modeled reduction in interest is greater than the entered costs over the full terms compared. A negative result means the modeled costs and new-loan interest exceed the current-loan interest in that comparison. Neither result alone captures every financial consequence: the timing of payments, how long the borrower keeps the loan, and the balance remaining at that date matter.
Break-even is a different question from total interest. The simple calculation divides upfront costs by the monthly payment reduction, estimating how many months of lower payments would recover those costs. It does not account for principal paid down at different rates, the value of money over time, or later sale or payoff. If the new payment is not lower, this simple method cannot identify a positive payback period. A more detailed comparison would examine remaining balances and cumulative cash paid at a chosen future date.
Choosing Inputs and Comparing Offers
Use figures from current statements and a written refinance quote wherever possible. The outstanding principal may differ from a payoff amount, which can include accrued interest or other charges. A quoted APR may also reflect charges differently from a note interest rate, so make sure each input represents the rate basis used in the comparison. Ask the lender for the proposed amount financed, itemized costs, payment schedule and any rate conditions; the calculator cannot supply those figures.
- Keep the current balance and proposed new balance aligned. If costs are financed, the new balance is higher and this calculator’s assumption no longer applies.
- Compare remaining term with remaining term when the goal is to isolate rate and cost differences. A longer replacement term can lower a payment while increasing total interest or extending repayment.
- Use the same cost definition across offers. Separate upfront expenses from costs included in the loan balance.
- For an adjustable-rate loan, a single APR cannot represent future rate changes. Model a stated scenario only, and recognize that later payments may differ.
Common Limitations and Misreadings
“Lower payment” and “savings” are not interchangeable. Extending repayment can reduce monthly payments while increasing the number of payments and total interest. Conversely, a shorter term may increase the monthly payment while reducing modeled interest. Compare both cash flow and the balance left after the period you expect to keep the loan.
Also avoid treating the estimate as a quote. Lenders may calculate payoff balances, payment dates, charges and APR using details absent here. Differences in rounding and timing can affect the result, and a refinancing cost paid upfront has a different cash-flow impact from a cost added to principal. This calculator does not determine taxes, legal consequences, eligibility, or whether a loan fits a person’s circumstances.
Frequently Asked Questions
How do I calculate refinance savings?
Estimate interest for the current loan and proposed loan using each balance, APR and remaining term. Subtract the new-loan interest and refinancing costs from current-loan interest. For an accurate comparison, also check balances and total cash paid over the same future period.
How long does it take to break even on refinancing?
A simple estimate is upfront costs divided by the monthly payment reduction. It is not useful as a positive payback period when the new payment is equal to or higher than the current payment, and it ignores changing balances and timing.
Can refinancing save money if the monthly payment goes up?
It can show lower total modeled interest if the replacement term is shorter, even when its monthly payment is higher. The payment schedule and the period used for comparison determine what the result means.
Should I include closing costs in the new loan balance?
This calculator treats costs as paid separately and keeps the new balance equal to the current balance. If costs are added to the loan, the amount financed and interest calculation change; use the proposed financed balance and account for costs consistently.
Why does a lower APR not always mean lower total cost?
The term, balance, fees and time the loan is kept all affect total cost. A longer term can produce more interest despite a lower APR, while upfront charges can offset interest reductions.
This result is an estimate; the lender’s disclosure gives the exact figures.
Related
Formula used
in bal | Current loan balance | $ | 250000 | 0.01 | 100000000 in capr | Current interest rate (APR) | % | 7 | 0.01 | 100 in cyrs | Current remaining term | years | 25 | 0.0833 | 50 in napr | New interest rate (APR) | % | 6 | 0.01 | 100 in nyrs | New loan term | years | 20 | 0.0833 | 50 in fees | Refinancing costs | $ | 5000 | 0 | 100000000 out net | Estimated net savings over new loan term | $ | (bal * (capr / 1200) / (1 - (1 + capr / 1200) ^ -(cyrs * 12)) * cyrs * 12 - bal) - (bal * (napr / 1200) / (1 - (1 + napr / 1200) ^ -(nyrs * 12)) * nyrs * 12 - bal) - fees | 2 out diff | New minus current monthly payment | $ | bal * (napr / 1200) / (1 - (1 + napr / 1200) ^ -(nyrs * 12)) - bal * (capr / 1200) / (1 - (1 + capr / 1200) ^ -(cyrs * 12)) | 2 out breakeven | Simple break-even time | months | fees / (bal * (capr / 1200) / (1 - (1 + capr / 1200) ^ -(cyrs * 12)) - bal * (napr / 1200) / (1 - (1 + napr / 1200) ^ -(nyrs * 12))) | 1
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.
More in this section
- Closing Costs on a House Loan: What to Expect$405.53
- Secured Loan for Home Refinancing: Payment Calculator$405.53
- Closing Cost House Calculator: Estimate Buyer Costs$8,500.00
- Closing Cost House Estimate Calculator
- Loan Repayment Extension Request Letter: What to Include$405.53
- Refinance Calculator With PMI and Loan Term