calculate-loan

01 Loan payments

Refinance Calculator: Compare Payments and Savings

Calculator No. 01-15722 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

Estimate for education, not financial advice. The result follows from the numbers you enter and the formula shown. It is not a quote or an offer, and it does not include fees, taxes or insurance unless the calculator asks for them. Ask your lender for the exact figures.

A refinance calculator compares your current loan with a proposed replacement by estimating monthly payments, remaining interest, and savings after refinancing costs. Enter the current balance, rate, and time left, plus the new loan’s rate, term, and fees; the result is an estimate, not a lender quote.

Formula

The calculator estimates interest over each loan’s full stated term and compares the two totals. For a loan principal P, annual percentage rate A, and N monthly payments, monthly rate r = A / 1200, and monthly payment M = P × r / [1 − (1 + r)−N]. Here, P is in dollars, A is APR in percent per year, N is years × 12, and M is dollars per month.

Current estimated interest = current payment × current months − current balance. The refinance loan amount is current balance plus upfront refinance costs. New estimated interest = new payment × new months − refinance loan amount. Estimated savings = current interest − new interest − upfront costs. The calculator assumes the fee is paid upfront for the comparison, but adds it to the new principal when calculating the new loan’s payment and interest. This represents a fee financed in the replacement loan while still counting its cost in the overall comparison; do not use the fee in both ways if your actual arrangement differs.

The headline savings expression is valid when estimated savings are zero or positive; if the result would be negative, it displays “Cannot compute.” The payment outputs are rounded to cents, and totals use those rounded monthly payments. Break-even months divides upfront costs by the monthly payment reduction; it requires the new payment to be lower.

Worked Example

Using the defaults: current balance $20,000, current APR 8%, five years remaining, new APR 6%, new term five years, and $500 in costs:

  1. Current monthly rate = 8 / 1200 = 0.0066667; current months = 5 × 12 = 60.
  2. Current payment = $20,000 × 0.0066667 / [1 − (1.0066667)−60] = $405.53.
  3. Current estimated interest = $405.53 × 60 − $20,000 = $4,331.80.
  4. New principal including financed costs = $20,000 + $500 = $20,500. New monthly rate = 6 / 1200 = 0.005; new payment over 60 months = $396.27.
  5. New estimated interest = $396.27 × 60 − $20,500 = $3,276.20.
  6. Estimated savings = $4,331.80 − $3,276.20 − $500 = $555.60. The payment reduction is $9.26 monthly, so break-even is $500 / $9.26 = 54.0 months.

The calculation uses the displayed, cent-rounded payments. The example’s break-even point falls close to the end of the five-year term, illustrating why total cost and timing matter alongside the monthly payment.

Assumptions

  • Both loans have fixed APRs and level monthly payments.
  • Payments are made monthly at the end of each period.
  • Interest compounds monthly at APR / 12.
  • Taxes, insurance, escrow, prepayment charges, and costs not entered are excluded. The entered refinance cost is treated as financed in the new balance and also counted as a cost in the savings comparison.

How to Compare the Results

First check that the current balance is the payoff amount you intend to refinance, not the original amount borrowed. Use the current loan’s remaining term rather than its original term. For the proposed loan, use the actual quoted APR and term, and include lender-provided costs in the fee input. If costs are paid from cash rather than added to the loan, this calculator’s new-payment estimate will differ because its formula finances those costs.

  • Monthly payment: A lower payment may come from a lower rate, a longer repayment term, or both. It does not by itself establish lower total cost.
  • Estimated savings: This compares interest across the specified terms and subtracts entered costs. It is sensitive to payment rounding, fees, and the accuracy of the loan figures.
  • Break-even: This is the number of months of payment reductions needed to offset the upfront cost. It is not a full measure of savings and can be misleading if you sell, pay off, or refinance again sooner.

A longer replacement term can reduce each payment while increasing the number of payments. It can also make a comparison over the entire new term look unlike the choice you face if you expect to keep the loan for only part of that time. For a fair time-based comparison, compare the amount paid and remaining balance at the same future date, using actual payoff figures where available; this calculator does not calculate future balances or model an early payoff.

Inputs, Costs, and Common Mistakes

Use annual APR percentages, not monthly percentages: enter 6 for 6%, not 0.06 or 0.5. The formula converts the annual percentage into a monthly decimal by dividing by 1,200. Enter years as years, dollars as dollars, and the remaining principal rather than the original loan amount.

Refinance quotes may distinguish the interest rate from APR, which can reflect certain borrowing costs. The calculator has separate rate fields but no detailed fee schedule, so enter comparable APR figures from the lender’s disclosures and use the fee field for costs you want included. Do not assume every listed charge is included in an APR or in the fee estimate; check the quote’s breakdown.

Other common errors include comparing different payoff dates, overlooking a prepayment penalty or a final payment that differs from the regular amount, and assuming a calculator includes taxes, insurance, or other monthly charges. The model also assumes the current loan’s payment continues unchanged for the stated remaining term. If payments vary, the rate is adjustable, or the balance changes through extra payments, the estimate will not reflect that history.

Limits and Alternatives

This is a simplified amortizing-loan comparison, not a complete cash-flow analysis. It does not model irregular payments, rate changes, cash taken out, fees paid in different ways, or the value of keeping cash instead of paying costs upfront. It also compares interest over each full loan term, which can make a longer new term difficult to compare directly with a shorter remaining term. Use the lender’s written payoff amount, payment schedule, APR, itemized costs, and projected balance for a more precise side-by-side review.

If the new payment is lower but the estimated savings are negative, that can reflect a longer term or costs that outweigh the modeled interest reduction. A negative result is not automatically a mistake: it signals that the stated assumptions do not produce nonnegative savings under this calculator’s definition. Change inputs only to match real terms, not to force a preferred result.

Frequently Asked Questions

How does a refinance calculator compare savings?
It estimates interest on the existing loan and the replacement loan, then subtracts the entered refinancing costs. The result depends on the balances, rates, terms, and fee treatment entered.

Does a lower monthly payment mean I save money?
No. A lower payment can result from extending the repayment period, which may increase total interest. Compare total cost and the expected time you will keep the loan, not just the payment.

How do I calculate refinance break-even?
Divide upfront costs by the monthly payment reduction, if the new payment is lower. The result is an approximate number of months to recoup the cost through payment reductions, not a complete comparison of remaining balances or total interest.

Should refinance costs be included in the new loan balance?
That depends on how the lender structures the transaction. This calculator assumes entered costs are financed into the replacement balance and also subtracts them as a cost; if costs are paid separately or handled differently, the estimate will need adjustment.

What figures should I get from a lender?
Ask for the payoff amount, proposed APR and term, monthly payment, itemized costs, and a payment schedule or projected balance. Use the figures for the same comparison date and verify which costs are financed.

This result is an estimate, and the lender’s disclosure gives the exact figures.

Related

Formula used
in p | Current loan balance | $ | 20000 | 1 | 100000000
in apr | Current interest rate (APR) | % | 8 | 0.01 | 100
in yrs | Years remaining on current loan | years | 5 | 0.0833 | 50
in napr | New interest rate (APR) | % | 6 | 0.01 | 100
in nyrs | New loan term | years | 5 | 0.0833 | 50
in fee | Refinance costs paid upfront | $ | 500 | 0 | 100000000
out sav | Estimated savings over the new loan term | $ | (pmt * yrs * 12 - p) - (npmt * nyrs * 12 - (p + fee)) - fee + 0 * sqrt((pmt * yrs * 12 - p) - (npmt * nyrs * 12 - (p + fee)) - fee) | 2
out pmt | Current monthly payment | $ | p * (apr / 1200) / (1 - (1 + apr / 1200) ^ -(yrs * 12)) | 2
out npmt | New monthly payment | $ | (p + fee) * (napr / 1200) / (1 - (1 + napr / 1200) ^ -(nyrs * 12)) | 2
out breakeven | Months to recover upfront costs from payment reduction | months | fee / (pmt - npmt) + 0 * sqrt(pmt - npmt) | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.

More in this section

The whole Loan payments section →