calculate-loan

01 Loan payments

Refinance Calculator: Compare the Breakeven Point

Calculator No. 01-15673 · Updated · Formula and assumptions shown below

Breakeven point 33 months
Monthly payment savings
$156.19
Level-payment formula, rounded to the cent
Current monthly principal-and-interest payment
$1,766.95
Level-payment formula, rounded to the cent
New monthly principal-and-interest payment
$1,610.75
Level-payment formula, rounded to the cent
You enter
Current loan balance ($), Current interest rate (APR) (%), Current remaining term (years), New interest rate (APR) (%), New loan term (years), Refinance costs paid upfront ($)
You get
Breakeven point (months), Monthly payment savings ($), Current monthly principal-and-interest payment ($), New monthly principal-and-interest payment ($)
Rounding
0 dp · 2 dp

Estimate for education, not financial advice. The result follows from the numbers you enter and the formula shown. It is not a quote or an offer, and it does not include fees, taxes or insurance unless the calculator asks for them. Ask your lender for the exact figures.

A refinance breakeven calculator estimates how many months it takes for monthly savings from a new loan to cover its upfront costs. Enter the current and new loan balances, rates, remaining and new terms, and refinance costs to compare monthly payments and find the estimated breakeven point.

Formula

The calculator estimates each level monthly principal-and-interest payment with the standard amortizing-loan formula, then divides upfront refinance costs by the difference between the current and new payments:

Payment = P × r ÷ [1 − (1 + r)−n], where r = APR ÷ 1200 and n = term in years × 12.

Monthly savings = current payment − new payment. The displayed breakeven point is ceil(upfront costs ÷ monthly savings), rounded up to a whole month. Here, P is the loan balance in dollars, APR is the annual percentage rate in percent, r is the monthly rate as a decimal, and n is the number of monthly payments. The current payment uses the current balance, rate, and remaining term; the new payment uses that same balance, the new rate, and the new term. Costs are dollars.

The formula assumes a positive monthly payment reduction. If the new payment is equal to or higher than the current payment, there is no payment-savings breakeven under this method; the calculator’s division cannot produce a meaningful positive month count. Do not interpret a negative result as a breakeven. A real calculator should report that condition as no payment-based breakeven.

Worked Example

Using the calculator’s default inputs: current balance $250,000, current APR 7%, 25 years remaining, new APR 6%, new term 25 years, and $5,000 in upfront costs.

  1. Current monthly rate: 7 ÷ 1200 = 0.0058333. Number of payments: 25 × 12 = 300.
  2. Current payment: $250,000 × 0.0058333 ÷ [1 − (1.0058333)−300] ≈ $1,766.95.
  3. New monthly rate: 6 ÷ 1200 = 0.005. The new loan also has 300 payments.
  4. New payment: $250,000 × 0.005 ÷ [1 − (1.005)−300] ≈ $1,610.46.
  5. Estimated monthly savings: $1,766.95 − $1,610.46 = $156.49.
  6. Breakeven: $5,000 ÷ $156.49 ≈ 31.95 months, rounded up to 32 months.

On these assumptions, accumulated payment savings reach or exceed the listed upfront costs after about 32 months. This is a simple payment comparison, not a forecast of total borrowing cost. It does not account for the new loan’s effect on the repayment timeline or for costs outside the input.

Assumptions

  • The rates stay fixed for the full terms, and payments are level monthly payments.
  • Payments are assumed to occur monthly; the formula uses monthly compounding at APR ÷ 12.
  • Both payment estimates use the entered balance as principal. The new loan’s actual amount may differ if costs are financed or the payoff balance changes.
  • Only the entered upfront costs are counted. The estimate excludes taxes, insurance, escrow, mortgage insurance, fees paid later, and changes in other loan expenses.

How to Read the Breakeven Point

The result is a time estimate, not a date or a guarantee. If you expect to keep the refinanced loan for longer than the calculated period, the basic payment-savings comparison shows more cumulative monthly savings than the entered upfront cost. If you expect to leave, sell, or refinance again earlier, the costs may not have been offset by those savings. This comparison does not determine whether refinancing is appropriate for any particular person.

Check what “refinance costs” includes before entering a number. A lender’s estimate may separate lender charges, third-party charges, prepaid items, and amounts that are added to the loan. For this calculation, include costs you want the savings to recover, and avoid counting amounts that are not truly additional costs. If costs are financed, they increase the new principal; using the old balance for both payments will understate the new payment and can overstate savings.

What the Calculator Leaves Out

The method compares monthly principal-and-interest payments only. It does not compare total interest over each loan’s life, because changing the term can make a lower payment last longer. For example, extending repayment can lower a monthly payment while increasing the number of payments. A fuller comparison considers the expected holding period, remaining balances at that point, total interest paid, and all relevant costs—not just the headline payment.

The estimate also treats the entered balance as the amount refinanced. The payoff figure on a specific date can differ from an account balance because of accrued interest or other adjustments. Ask the lender for the exact payoff amount and a detailed written estimate of costs, and use figures that refer to comparable dates and loan terms.

Common Comparison Mistakes

  • Comparing different time periods: Use the remaining term for the current loan, not its original term. Enter the proposed term for the new loan.
  • Looking only at the payment: A lower payment can result from stretching repayment, not solely from a lower rate.
  • Leaving out costs: Costs paid upfront or added to the balance affect the comparison. Be clear about which amounts the input represents.
  • Treating the estimate as exact: Payment rounding, payoff timing, adjustable rates, and changes in taxes or insurance can alter actual cash flows.
  • Assuming every cost is recoverable: Some expenses may not behave like a simple one-time fee. The calculation only divides the costs entered by estimated monthly savings.

Frequently Asked Questions

What does refinance breakeven point mean?
The breakeven point is the estimated number of months for monthly payment savings to equal the refinance costs entered. It does not include expenses or balance changes the calculator does not model.

How do I calculate the refinance breakeven point?
Subtract the estimated new monthly payment from the current payment, then divide upfront costs by positive monthly savings. Round the result up to a whole month. If savings are zero or negative, this payment-based method has no breakeven.

Does a shorter breakeven always mean a better refinance?
No. Breakeven is one limited comparison. It does not account for all loan costs, the remaining balance, the length of the new term, or how long the loan will be kept.

Should I include closing costs in the calculator?
Enter the upfront costs you want the monthly savings to recover, based on a detailed estimate. If costs are rolled into the new loan, include their effect on the new principal rather than treating them only as cash paid upfront.

Why does my payment estimate differ from a lender’s quote?
The lender may use a different payoff balance, payment date, loan amount, rate structure, or fee treatment. This calculator estimates principal and interest and excludes items such as taxes and insurance.

This result is an estimate for educational purposes, and the lender’s disclosure gives the exact figures.

Related

Formula used
in bal | Current loan balance | $ | 250000 | 1 | 100000000
in old | Current interest rate (APR) | % | 7 | 0.01 | 100
in rem | Current remaining term | years | 25 | 0.0833 | 50
in apr | New interest rate (APR) | % | 6 | 0.01 | 100
in yrs | New loan term | years | 25 | 0.0833 | 50
in fee | Refinance costs paid upfront | $ | 5000 | 0 | 10000000
out be | Breakeven point | months | ceil(fee / (bal * (old / 1200) / (1 - (1 + old / 1200) ^ -(rem * 12)) - bal * (apr / 1200) / (1 - (1 + apr / 1200) ^ -(yrs * 12)))) | 0
out sav | Monthly payment savings | $ | bal * (old / 1200) / (1 - (1 + old / 1200) ^ -(rem * 12)) - bal * (apr / 1200) / (1 - (1 + apr / 1200) ^ -(yrs * 12)) | 2
out oldp | Current monthly principal-and-interest payment | $ | bal * (old / 1200) / (1 - (1 + old / 1200) ^ -(rem * 12)) | 2
out newp | New monthly principal-and-interest payment | $ | bal * (apr / 1200) / (1 - (1 + apr / 1200) ^ -(yrs * 12)) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.

More in this section

The whole Loan payments section →