calculate-loan

01 Loan payments

Reducing Balance Method Formula & How to Use It

Calculator No. 01-21597 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

Estimate for education, not financial advice. The result follows from the numbers you enter and the formula shown. It is not a quote or an offer, and it does not include fees, taxes or insurance unless the calculator asks for them. Ask your lender for the exact figures.

The reducing balance method formula calculates depreciation by applying a fixed percentage rate to the asset’s book value at the start of each period, so the depreciation charge decreases over time. You enter the asset’s cost, its salvage value, its useful life, and the number of periods elapsed to find the current book value and the depreciation for any given year.

Formula

The reducing balance method (also called the declining balance method) uses this formula for the annual depreciation charge:

Depreciation for year t = Book value at start of year t × Depreciation rate

where:

  • Book value at start of year t = Cost × (1 − rate)t−1
  • Depreciation rate (r) = 1 − (Salvage value / Cost)(1 / Useful life)
  • Cost = original purchase price of the asset (in $)
  • Salvage value = estimated resale or scrap value at the end of its useful life (in $)
  • Useful life = number of years the asset is expected to be used (in years)
  • t = the year number for which you are calculating depreciation (1 for the first year)

The rate formula ensures that after the full useful life, the book value exactly equals the salvage value. If you use a different rate (like double-declining), the asset may not reach salvage value exactly, and you may need to switch to straight-line in the final year.

Worked Example

Using the calculator defaults: cost = $10,000, salvage = $1,000, useful life = 5 years, and we want the depreciation for year 3.

  1. Calculate the rate: r = 1 − (1000 / 10000)(1/5) = 1 − (0.1)0.2 ≈ 1 − 0.630957 = 0.369043, or 36.90%.
  2. Book value at start of year 3 = 10000 × (1 − 0.369043)2 = 10000 × (0.630957)2 ≈ 10000 × 0.398107 = $3,981.07.
  3. Depreciation for year 3 = $3,981.07 × 0.369043 ≈ $1,469.17.

The calculator shows a rate of 36.90%, a book value at year start of $3,981.07, and a depreciation charge of $1,469.17 for year 3. Notice that the depreciation in year 1 would be $3,690.43, and in year 5 it drops to about $1,000.00, which brings the book value down to the salvage value.

Assumptions

  • The depreciation rate is constant each year and is derived from the cost, salvage value, and useful life.
  • Depreciation is calculated annually at the end of each year, not monthly or daily.
  • The salvage value is assumed to be positive and less than the cost.
  • This method does not account for additional capital expenditures, improvements, or partial-year conventions unless you adjust the inputs.
  • No taxes, inflation, or disposal costs are included.

How the Reducing Balance Method Works

Unlike straight-line depreciation, which spreads the cost evenly, the reducing balance method applies a percentage to the remaining book value. Because the book value decreases each year, the dollar amount of depreciation also decreases. This matches the pattern where many assets lose more value in their early years—think of a new car or computer—and lose less as they age.

The key is the book value: it starts at the cost and is reduced by the depreciation each year. The depreciation rate is calculated once at the beginning and then applied to the current book value. This creates a geometric decline, not a linear one.

When to Use the Reducing Balance Method

This method is most appropriate when an asset’s productivity or revenue-generating ability declines over time, or when maintenance costs rise as the asset ages. Common examples include:

  • Vehicles and machinery that lose value quickly in the first few years.
  • Electronic equipment that becomes obsolete rapidly.
  • Assets where the matching principle suggests higher depreciation in early years to offset higher revenue.

If an asset provides relatively even benefits over its life, straight-line depreciation may be a better fit. The reducing balance method is also used in some accounting frameworks for tax purposes, but the specific rules vary by jurisdiction and are not modeled here.

How to Choose the Depreciation Rate

You can choose a rate in two ways. The first is to derive it from the salvage value and useful life, as the calculator does. The second is to use a fixed multiple of the straight-line rate, such as double-declining balance (200% of straight-line). For example, if the straight-line rate is 20% (1/5), double-declining uses 40%.

If you use a fixed rate like 40%, the asset will not automatically end at the salvage value. In practice, you would switch to straight-line in the year when straight-line depreciation on the remaining book value exceeds the reducing balance amount, ensuring the asset reaches salvage value. The formula in the calculator avoids this complexity by solving for the rate that exactly hits the salvage value.

Common Mistakes and Misconceptions

A frequent error is confusing the reducing balance method with the sum-of-the-years’-digits method, which also accelerates depreciation but uses a different calculation. Another mistake is applying the rate to the original cost instead of the book value—that would be straight-line, not reducing balance.

People also often forget that the salvage value is not depreciated. The book value never goes below salvage value in this method if the rate is derived correctly. If you use a fixed rate that is too high, the book value could drop below salvage early, which is unrealistic.

Unit confusion is another issue: the rate is a percentage, not a decimal. In the formula, use 0.369043, not 36.9043. The calculator handles this conversion for you.

Comparison with Straight-Line Depreciation

Straight-line depreciation charges the same amount every year: (Cost − Salvage) / Useful life. For a $10,000 asset with $1,000 salvage and 5-year life, that is $1,800 per year. The reducing balance method charges $3,690 in year 1, $2,329 in year 2, $1,469 in year 3, $927 in year 4, and $585 in year 5 (using the derived rate). The total depreciation is the same ($9,000), but the timing differs.

The reducing balance method results in a higher depreciation expense early on, which lowers taxable income in early years (if allowed by tax rules) and better reflects the asset’s actual value decline. However, it is more complex to calculate and requires tracking book value each year.

Limitations of the Reducing Balance Method

This method assumes a constant rate of decline, which may not reflect reality for all assets. It also requires an estimate of salvage value, which can be uncertain. Additionally, the derived rate formula only works when the salvage value is positive; if salvage is zero, the rate becomes 100%, which would depreciate the entire asset in the first year. In that case, you would need to use a fixed rate or switch to another method.

Partial-year depreciation is not handled automatically. If you acquire an asset mid-year, you would need to prorate the first year’s depreciation, which the calculator does not do.

Frequently Asked Questions

What is the difference between reducing balance and declining balance?

They are the same method. “Reducing balance” and “declining balance” are interchangeable names for the approach of applying a constant percentage to the declining book value.

How do I calculate the depreciation rate if I don’t know the salvage value?

You can use a fixed percentage, such as double the straight-line rate. For example, with a 5-year life, straight-line is 20%, so double-declining uses 40%. You would then apply that rate to the book value each year, and in the final year, adjust to bring the book value to zero or the estimated salvage.

Can the reducing balance method be used for tax purposes?

Many tax systems allow accelerated depreciation methods, but the specific rules vary by country and asset type. You should check with your tax authority or accountant to see if this method is permitted and what rate to use.

What happens if the salvage value is zero?

The derived rate formula would give 100%, which is not practical. In that case, use a fixed rate like double-declining and switch to straight-line in the last year, or use a different method entirely.

How do I handle partial-year depreciation?

You would prorate the first year’s depreciation based on the number of months the asset was in service. For example, if you use the asset for 6 months, multiply the first year’s depreciation by 6/12, and then adjust the remaining years accordingly.

Why does the book value never reach exactly the salvage value with a fixed rate?

Because applying a percentage to a decreasing balance approaches zero asymptotically. To force the book value to equal salvage at the end of the useful life, you either derive the rate as shown above or switch to straight-line in the final year.

The result from this calculator is an estimate based on the inputs you provide; your accountant or the relevant accounting standards will determine the exact depreciation you should record.

Related

Formula used
in p | Asset cost | $ | 10000 | 1 | 100000000
in s | Salvage value | $ | 1000 | 0 | 100000000
in n | Useful life | years | 5 | 1 | 50
in yrs | Year to calculate | year | 3 | 1 | 50
out rate | Depreciation rate | % | (1 - (s / p) ^ (1 / n)) * 100 | 2
out bv | Book value at year start | $ | p * (1 - rate / 100) ^ (yrs - 1) | 2
out dep | Depreciation for that year | $ | p * (1 - rate / 100) ^ (yrs - 1) * (rate / 100) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.

More in this section

The whole Loan payments section →