calculate-loan

01 Loan payments

Loan to Value Calculation: How to Calculate LTV

Calculator No. 01-21622 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

Estimate for education, not financial advice. The result follows from the numbers you enter and the formula shown. It is not a quote or an offer, and it does not include fees, taxes or insurance unless the calculator asks for them. Ask your lender for the exact figures.

The loan-to-value (LTV) ratio is a simple number that compares the size of a loan to the value of the asset it buys, expressed as a percentage. You calculate it by dividing the loan amount by the appraised property value (or purchase price, whichever is lower) and multiplying by 100. This ratio is a key factor lenders use to assess risk, determine interest rates, and decide whether mortgage insurance is required.

Formula

The LTV formula is straightforward:

LTV = (Loan Amount ÷ Appraised Property Value) × 100

Where:

  • Loan Amount – the principal you borrow, in dollars.
  • Appraised Property Value – the lender’s assessed value of the property, in dollars. This is often the lower of the appraised value or the purchase price.
  • LTV – expressed as a percentage, typically rounded to the nearest whole number.

For a refinance, the loan amount is the new mortgage balance, and the value is the current appraised value of the home. For a home equity loan or HELOC, the combined LTV (CLTV) includes all outstanding mortgages, not just the new one.

Worked Example

Suppose you want to buy a home appraised at $250,000, and you plan to make a down payment of $50,000. Your loan amount would be $200,000.

Plug the numbers into the formula:

LTV = ($200,000 ÷ $250,000) × 100 = 0.80 × 100 = 80%

That means you are borrowing 80% of the property’s value, and your equity is 20%.

Now, if the appraised value were only $240,000 (lower than the purchase price), the lender would use $240,000 as the value. Your LTV would be ($200,000 ÷ $240,000) × 100 = 83.33%, which rounds to 83%. This is why the appraised value matters—it can change your LTV even if your down payment stays the same.

Assumptions

  • LTV is based on the lower of the appraised value or the purchase price, which is standard for purchase mortgages.
  • For refinances, the value is the current appraised value, not the original purchase price.
  • The calculation does not include closing costs, mortgage insurance premiums, or other fees.
  • LTV is a static snapshot at loan origination; it changes over time as you pay down the balance and as property values fluctuate.

Why LTV Matters to Lenders

Lenders use LTV to gauge how much risk they are taking. A higher LTV means you have less equity in the property, so if you default, the lender may not be able to recover the full loan amount by selling the home. That is why LTV directly affects:

  • Interest rates – Higher LTVs often come with higher rates because the lender is taking on more risk.
  • Mortgage insurance – Many conventional loans require private mortgage insurance (PMI) when the LTV is above 80%. Once your LTV drops to 80% or below, you can often request PMI removal.
  • Approval odds – A very high LTV (e.g., above 95% or 100%) may limit your loan options or require special programs.
  • Refinance eligibility – Some refinance programs have maximum LTV limits, especially for cash-out refinances.

Keep in mind that actual LTV thresholds vary by lender and loan type. The numbers here are general guidelines, not guarantees.

How to Lower Your LTV

If you want a lower LTV, you have two main levers: increase the down payment or reduce the loan amount. Here are practical ways:

  • Save a larger down payment before buying.
  • Look for a less expensive home, which lowers both the purchase price and the loan amount.
  • Make extra principal payments on your mortgage to build equity faster.
  • Wait for property values to rise, which increases the denominator in the formula.
  • For a refinance, pay down the existing balance before applying.

Even a small change in LTV can matter. Dropping from 80% to 79% can eliminate PMI, which saves you money every month.

Common Mistakes and Misconceptions

One common error is using the purchase price instead of the appraised value when the two differ. Lenders use the lower of the two to protect themselves, so always use that figure.

Another misconception is that LTV is fixed for the life of the loan. In reality, your LTV changes every time you make a payment (the loan balance goes down) and whenever the property value changes. That is why you might hear about “current LTV” when you apply for a refi or a home equity line.

People also confuse LTV with CLTV (combined loan-to-value). CLTV includes all loans secured by the property, such as a first mortgage plus a home equity loan. For example, if you have a $150,000 first mortgage and a $20,000 home equity loan on a home worth $200,000, your CLTV is ($150,000 + $20,000) ÷ $200,000 = 85%.

Finally, do not forget that LTV is just one factor. Lenders also look at your credit score, debt-to-income ratio, and employment history. A high LTV is not an automatic rejection, but it may mean higher costs.

LTV in Different Loan Types

LTV applies to more than just home purchases. Here is how it works in other contexts:

  • Refinancing – The loan amount is the new mortgage, and the value is the current appraised value. Cash-out refinances often have stricter LTV limits (e.g., 80% or lower) than rate-and-term refinances.
  • Home equity loans and HELOCs – Lenders look at CLTV, which includes your existing mortgage. Most lenders cap CLTV at 80–90%.
  • Auto loans – LTV is calculated as the loan amount divided by the vehicle’s value (often the purchase price or wholesale value). High LTVs on cars can lead to higher rates or require a larger down payment.
  • Investment properties – Lenders typically require lower LTVs (e.g., 70–75%) for investment properties compared to primary residences.

In every case, the principle is the same: the lower the LTV, the more equity you have, and the less risk the lender carries.

How to Use LTV in Your Financial Planning

Knowing your LTV helps you make informed decisions, but it is not a recommendation to take any specific action. Here is how you can use it:

  • Before buying, estimate your LTV based on the down payment you plan to make. This tells you whether PMI will be required.
  • When refinancing, calculate your current LTV to see if you might qualify for better terms. Lenders will do this anyway, but you can get a rough idea.
  • If you are considering a home equity loan, calculate your CLTV to see if you have enough equity to borrow against.
  • Track your LTV over time—as you pay down your mortgage and as home values change, your LTV will shift. This can help you plan when to drop PMI or when to refinance.

Remember, LTV is a tool, not a rule. It gives you a snapshot of your equity position, but the actual loan terms depend on many other factors.

Frequently Asked Questions

What is a good LTV for a mortgage?

Generally, an LTV of 80% or lower is considered favorable because it avoids the need for private mortgage insurance on conventional loans. LTVs above 80% are common for first-time buyers, but they come with higher costs. There is no universal “good” number—it depends on your financial situation and the lender’s criteria.

Does LTV affect my interest rate?

Yes, in most cases. A higher LTV means more risk for the lender, so they may charge a higher interest rate to compensate. The exact rate difference varies by lender and market conditions, so you would need to compare quotes to see the impact.

What is the difference between LTV and CLTV?

LTV is the ratio of a single loan to the property value. CLTV (combined loan-to-value) includes all loans secured by the property, such as a first mortgage and a home equity line. CLTV gives lenders a fuller picture of your total debt against the property.

Can I remove PMI once my LTV drops below 80%?

For conventional loans, you can request PMI removal once your LTV reaches 80% based on the original appraised value. Lenders may require an appraisal to confirm the current value. For FHA loans, the rules are different—you may need to refinance to remove mortgage insurance, depending on the loan’s origination date.

How do I calculate LTV for a refinance?

Divide the new loan amount by the current appraised value of your home. For example, if you owe $150,000 and your home is appraised at $200,000, your LTV is 75%. If you are doing a cash-out refi, the new loan amount includes the cash you take out, so the LTV will be higher.

What happens if my LTV is above 100%?

An LTV above 100% means you owe more than the property is worth, often called being “underwater.” This can make refinancing difficult and may limit your options for selling or borrowing against the home. Some government programs exist to help, but they are not modeled here—check with your lender or servicer for current options.

This LTV calculation is an estimate for educational purposes. Your lender’s final underwriting will use its own appraisal and may apply additional rules, so the exact figure will appear on your loan disclosure.

Related

Formula used
in p | Loan amount | $ | 20000 | 1 | 100000000
in apr | Interest rate (APR) | % | 8 | 0.01 | 100
in yrs | Loan term | years | 5 | 0.0833 | 50
out pmt | Monthly payment | $ | p * (apr / 1200) / (1 - (1 + apr / 1200) ^ -(yrs * 12)) | 2
out int | Total interest | $ | pmt * yrs * 12 - p | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.

More in this section

The whole Loan payments section →