calculate-loan

01 Loan payments

Life Cover Term Comparison: How to Compare Policies

Calculator No. 01-26815 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

Estimate for education, not financial advice. The result follows from the numbers you enter and the formula shown. It is not a quote or an offer, and it does not include fees, taxes or insurance unless the calculator asks for them. Ask your lender for the exact figures.

This calculator compares two life insurance term quotes side by side: you enter the coverage amount, term length, and monthly premium for each policy, and it shows the total cost over the term and the cost per $1,000 of coverage, so you can see which quote is more economical. It also shows the difference in total outlay, helping you weigh a lower monthly payment against a longer term.

Formula

For each policy, the total cost over the term is:

Total Cost = Monthly Premium × Term (years) × 12

Cost per $1,000 of coverage is:

Cost per $1,000 = Total Cost ÷ (Coverage Amount ÷ 1,000)

Variables:

  • Monthly Premium – the amount you pay each month (in dollars).
  • Term – the number of years the policy is active.
  • Coverage Amount – the death benefit paid out (in dollars).

Worked Example

Using the defaults: Policy 1 has $500,000 coverage, 20-year term, $45/month. Policy 2 has $500,000 coverage, 20-year term, $40/month.

Policy 1 total cost = $45 × 20 × 12 = $10,800.00

Policy 2 total cost = $40 × 20 × 12 = $9,600.00

Policy 1 cost per $1,000 = $10,800 ÷ 500 = $21.60

Policy 2 cost per $1,000 = $9,600 ÷ 500 = $19.20

Difference = $10,800 – $9,600 = $1,200.00

So Policy 2 is $1,200 cheaper over the term, and the cost per $1,000 of coverage is $2.40 less.

Assumptions

  • Premiums are level (do not change) throughout the term.
  • All premiums are paid monthly; if paid annually, the total may differ slightly.
  • No policy fees, riders, or inflation adjustments are included.
  • No cash value or investment component is considered (term life only).

Why Compare Life Cover Terms?

Term life insurance provides a death benefit for a specific period, such as 10, 20, or 30 years. Comparing quotes is essential because premiums can vary significantly between insurers for the same coverage, and the length of the term affects both the premium and how long your beneficiaries are protected. A longer term usually costs more per month, but it locks in coverage for a longer period, which can be important if you have young children or a long mortgage. The cost per $1,000 of coverage is a useful standardised metric because it lets you compare policies with different coverage amounts on an equal footing.

How to Use This Comparison Calculator

Enter the coverage amount, term, and monthly premium for two policies you are considering. The calculator will show the total cost over the full term and the cost per $1,000 of coverage for each. The difference line tells you how much more (or less) Policy 1 costs in total compared to Policy 2. Use this to see whether a slightly higher monthly premium is offset by a longer term or higher coverage. For example, a policy with a $30/month premium over 30 years costs $10,800 total, while a $25/month premium over 20 years costs $6,000 – the latter is cheaper in total but covers you for 10 fewer years.

What to Look For in a Term Life Quote

  • Level vs. increasing premiums – level premiums stay the same; increasing ones rise with age.
  • Renewability – can you renew at the end of the term without a medical exam?
  • Conversion option – can you convert to permanent insurance later?
  • Riders – such as critical illness or waiver of premium, which add cost.
  • Financial strength of the insurer – check ratings from independent agencies.

These features affect the value of the policy beyond the raw premium. A slightly higher premium might be worth it if the policy includes a conversion option or a longer guaranteed renewability period.

Common Mistakes When Comparing Term Life

  • Comparing quotes with different coverage amounts – always compare per $1,000 of coverage.
  • Ignoring the term length – a 30-year policy costs more per month but may be necessary if you have a 30-year mortgage.
  • Forgetting to check the insurer’s claims-paying ability – a cheap policy from a weak company may not pay out.
  • Not reading the fine print on exclusions – some policies exclude certain causes of death for the first few years.
  • Assuming the premium is guaranteed – some policies have premiums that increase after a set period.

To avoid these, always request quotes with identical coverage and term, and ask the insurer to confirm that the premium is level for the entire term.

Costs Beyond the Premium

Term life insurance usually has no cash value, so the only cost is the premium. However, some policies charge an initial policy fee or have a higher cost per $1,000 for older applicants. Also, if you smoke or have health conditions, your premium will be higher. The calculator does not include these because they are individual-specific. Use the cost per $1,000 figure to compare quotes from different insurers, but remember that the actual premium you are offered depends on your age, health, and lifestyle.

Alternatives to Term Life

If you are comparing term life, you might also consider:

  • Whole life insurance – provides lifelong coverage and builds cash value, but premiums are much higher.
  • Universal life – flexible premiums and death benefit, but more complex.
  • Group life insurance – often available through an employer, but usually not portable.

Term life is generally the cheapest way to get a large death benefit for a set period, which is why it is often recommended for covering temporary needs like a mortgage or children’s education. But if you need coverage for your whole life, permanent policies might be more appropriate, though they are not modelled here.

Frequently Asked Questions

How do I compare life insurance quotes if the coverage amounts differ?

Use the cost per $1,000 of coverage. Divide the total cost by the coverage amount in thousands. For example, a $300,000 policy costing $7,200 total has a cost of $24 per $1,000, while a $500,000 policy costing $10,000 total has a cost of $20 per $1,000 – the second is cheaper per unit of coverage.

Is a longer term always better?

Not necessarily. A longer term costs more in total, but it guarantees coverage for a longer period. If you have young children, a 30-year term might be wise to cover them until they are independent. If your mortgage will be paid off in 15 years, a 15-year term might be sufficient and cheaper. The calculator shows the total cost difference, helping you decide based on your needs.

Why is the monthly premium for the same coverage so different between insurers?

Insurers use different underwriting criteria, mortality tables, and expense loads. Some specialise in certain age groups or health profiles. Your age, health, smoking status, and occupation affect the premium. Always get quotes from several insurers with identical coverage and term to find the best rate for your situation.

What is a ‘level premium’ and why does it matter?

A level premium means the monthly payment stays the same for the entire term. Some policies have ‘annual renewable’ premiums that increase each year. Level premiums are easier to budget for and are common in term life. When comparing, make sure both quotes are for level premiums, otherwise the comparison is not apples-to-apples.

Can I use this calculator to compare a term life policy with a whole life policy?

No, because whole life has a cash value component and different cost structure. This calculator only compares term life policies, where the only cost is the premium for the death benefit. For whole life, you would need to consider the cash value growth and surrender charges, which are not modelled here.

What if I only have one quote – can I still use this?

Yes, you can enter the same coverage and term for both policies, but put different premiums. For example, if you have one quote at $40/month, enter $40 for Policy 1 and $45 for Policy 2 to see the difference if you were to pay more. This helps you understand the impact of a higher premium on total cost.

This result is an estimate based on the inputs you provide; the exact figures from your insurer’s quote will be the final authority.

Related

Formula used
in p1 | Policy 1 coverage | $ | 500000 | 1000 | 10000000
in yrs1 | Policy 1 term | years | 20 | 1 | 50
in prem1 | Policy 1 monthly premium | $ | 45 | 1 | 10000
in p2 | Policy 2 coverage | $ | 500000 | 1000 | 10000000
in yrs2 | Policy 2 term | years | 20 | 1 | 50
in prem2 | Policy 2 monthly premium | $ | 40 | 1 | 10000
out tot1 | Policy 1 total cost | $ | prem1 * yrs1 * 12 | 2
out tot2 | Policy 2 total cost | $ | prem2 * yrs2 * 12 | 2
out per1 | Policy 1 cost per $1,000 | $ | tot1 / (p1 / 1000) | 2
out per2 | Policy 2 cost per $1,000 | $ | tot2 / (p2 / 1000) | 2
out diff | Difference (Policy 1 - Policy 2) | $ | tot1 - tot2 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.

More in this section

The whole Loan payments section →