calculate-loan

01 Loan payments

Interest Only Loan Schedule: How It Works

Calculator No. 01-21000 · Updated · Formula and assumptions shown below

Interest-only payment $133.33
Balance after IO period
$20,000.00
= Loan amount
Amortizing payment after IO
$904.55
Level-payment formula, rounded to the cent
Loan amount
$20,000
Input
You enter
Loan amount ($), Interest rate (APR) (%), Interest-only period (years), Total loan term (years)
You get
Interest-only payment ($), Balance after IO period ($), Amortizing payment after IO ($)
Rounding
2 dp

Estimate for education, not financial advice. The result follows from the numbers you enter and the formula shown. It is not a quote or an offer, and it does not include fees, taxes or insurance unless the calculator asks for them. Ask your lender for the exact figures.

An interest-only loan schedule shows payments that cover only the interest for a set period, leaving the principal untouched until the interest-only term ends. You enter the loan amount, interest rate, and interest-only period, and the calculator returns the monthly interest-only payment, the principal balance at the end of that period, and the payment required afterward to fully amortize the loan.

Formula

The interest-only payment is simply the principal times the monthly interest rate:

Interest-only payment = P × (r / 12)

Where:

  • P = loan principal (the amount borrowed, in $)
  • r = annual interest rate (APR, as a percentage, e.g., 8 means 8%)
  • r / 12 = monthly interest rate (decimal, e.g., 0.08 / 12 = 0.006667)

After the interest-only period ends, the remaining balance (still P, because no principal was paid) must be repaid over the remaining term using the standard amortization formula:

Amortizing payment = B × (r / 12) / [1 – (1 + r / 12)^(-n)]

Where:

  • B = balance at the start of the amortization phase (here, still P)
  • n = number of remaining monthly payments = (total term in years – interest-only years) × 12

Worked Example

Using the default values: loan amount $20,000, APR 8%, interest-only period 3 years, total loan term 5 years.

  1. Monthly interest rate = 8 / 1200 = 0.0066667
  2. Interest-only payment = 20,000 × 0.0066667 = $133.33 (rounded to the cent)
  3. Balance after 3 years = $20,000 (no principal paid)
  4. Remaining months = (5 – 3) × 12 = 24
  5. Amortizing payment = 20,000 × 0.0066667 / [1 – (1.0066667)^(-24)]
  6. (1.0066667)^(-24) ≈ 0.8526, so denominator ≈ 0.1474
  7. Amortizing payment = 133.33 / 0.1474 ≈ $904.55

So the first 36 payments are $133.33 each, then the remaining 24 payments jump to about $904.55 each.

Assumptions

  • Fixed interest rate for the entire loan term (no rate changes).
  • Interest is compounded monthly at APR / 12.
  • Payments are made at the end of each month.
  • No fees, taxes, insurance, or other charges are included.
  • The interest-only period is followed by a fully amortizing period using the same rate.

How an Interest-Only Schedule Works

In a standard amortizing loan, each payment covers both interest and a portion of principal, so the balance declines each month. An interest-only loan flips that: during the interest-only period, your payment equals exactly the interest that accrued that month, so the principal balance stays the same. After the period ends, the loan typically converts to a fully amortizing schedule, meaning the remaining principal is spread over the remaining term. The result is a much lower payment early on, followed by a significantly higher payment later.

For example, a $200,000 loan at 6% APR with a 5-year interest-only period and a 30-year total term has an interest-only payment of $1,000 per month. After 5 years, the balance is still $200,000, and the payment for the remaining 25 years jumps to about $1,288. That is a 29% increase. If the total term were 15 years (10 years of amortizing), the payment would be about $2,220 – more than double the interest-only payment.

Why Borrowers Use Interest-Only Schedules

Interest-only loans are used in specific situations where cash flow is tight in the early years or where the borrower expects income to rise later. Common uses include:

  • Real estate investors who plan to sell or refinance before the interest-only period ends.
  • Borrowers with irregular income who prefer lower fixed payments now and can handle higher payments later.
  • People who want to invest the money they save on payments elsewhere, expecting a higher return than the loan’s interest rate.

However, the lower early payments come with a trade-off: you build no equity during the interest-only period. If property values fall, you could owe more than the property is worth. Also, if your income does not rise as planned, the payment jump can be a serious strain.

How to Read the Schedule

An interest-only schedule has two distinct phases. In the first phase, every payment is identical and goes entirely to interest. The principal balance stays constant. In the second phase, the payment is recalculated to amortize the remaining balance over the remaining term, so each payment covers interest plus a growing portion of principal. The schedule should show:

  • The interest-only payment amount and the number of months it applies.
  • The principal balance at the end of the interest-only period (which equals the original loan amount).
  • The new payment amount for the amortization phase.
  • The total interest paid over the entire loan (which is higher than a standard loan, because you paid interest on the full principal for longer).

To see the full monthly breakdown, you would need a full amortization schedule for the second phase. Many lenders provide this when you request a loan estimate.

Common Mistakes and Misconceptions

Mistake 1: Assuming the payment stays the same after the interest-only period. It does not – it jumps to the amortizing payment, which can be substantially higher. Always calculate the post-period payment before committing.

Mistake 2: Ignoring the interest rate risk. If the loan has a variable rate, the interest-only payment can change even during the interest-only period. The calculator assumes a fixed rate; real loans may adjust.

Mistake 3: Thinking you are building equity. You are not. Your balance remains exactly what you borrowed. Only paying extra toward principal builds equity during the interest-only phase.

Mistake 4: Confusing the total loan term with the interest-only period. A 30-year loan with a 5-year interest-only period still has a 30-year total term, but the amortization is compressed into the remaining 25 years, which is why the payment rises.

Comparing Interest-Only vs. Standard Amortization

The key difference is the timing of principal repayment. With a standard loan, you pay down principal from the first payment, so the balance falls steadily. With an interest-only loan, you delay all principal repayment to the second phase. The trade-off is clear:

  • Early payments: Interest-only payments are lower (often by 20–40%).
  • Later payments: Amortizing payments after the interest-only period are higher than a standard loan’s payment, because the same principal is repaid in fewer months.
  • Total interest: Interest-only loans usually cost more in total interest, because you pay interest on the full principal for the entire interest-only period.
  • Equity: With a standard loan, you build equity from month one; with interest-only, you build none until the amortization phase begins.

For example, a $200,000 loan at 6% for 30 years has a standard payment of $1,199.10. An interest-only version (5-year IO) has a $1,000 payment for 60 months, then $1,288.37 for 300 months. Total interest on the standard loan is $231,676; on the interest-only loan it is $446,511 – nearly double. The lower early payment comes at a steep long-term cost.

Costs and Risks to Consider

Interest-only loans are not inherently good or bad – they are a tool with specific costs and risks. The main costs are:

  • Higher total interest compared to a standard loan of the same amount and rate.
  • Payment shock when the interest-only period ends, which can be hundreds or thousands of dollars per month.
  • Negative amortization risk if the loan allows payments below the interest due (not modeled here, but some loans allow this, which increases the balance).
  • No equity build-up during the interest-only period, which can be risky if property values decline.

Before choosing an interest-only loan, run the numbers with your actual loan terms, and make sure you can afford the higher payment later. If you plan to sell or refinance before the interest-only period ends, consider the risk that you may not be able to do so if market conditions change.

Alternatives to Interest-Only Loans

If you want lower early payments but still want to build equity, consider these alternatives:

  • Standard fixed-rate loan with a longer term – e.g., a 40-year loan instead of 30, which lowers the payment without delaying principal entirely.
  • Interest-only with extra principal payments – you can voluntarily pay extra toward principal during the interest-only period, building equity while keeping the option of lower payments.
  • Adjustable-rate mortgage (ARM) – a lower initial rate can reduce payments, but the rate can adjust later.
  • Balloon loan – low payments for a set period, then a large lump-sum payment at the end (not the same as interest-only, but similar in spirit).

Each option has its own risks and costs. The right choice depends on your cash flow, how long you plan to keep the loan, and your tolerance for payment changes.

Frequently Asked Questions

How long can an interest-only period last? Interest-only periods typically range from 1 to 10 years, depending on the loan product. Some loans allow up to 10 years, but the most common are 3, 5, or 7 years. The calculator lets you set any period up to 50 years, but in practice, longer periods are rare and may come with higher rates.

Can I pay extra during the interest-only period? Yes, most loans allow extra principal payments at any time. Paying extra during the interest-only period reduces the balance, which means lower interest charges and a lower payment when the amortization phase begins. However, check your loan agreement for prepayment penalties or restrictions.

What happens if I don’t pay the interest-only payment? You would be in default, just like any other loan. The lender can report late payments to credit bureaus and eventually foreclose or repossess the collateral. The interest-only payment is still a required payment – it just doesn’t reduce the principal.

Is an interest-only loan the same as a negative amortization loan? No. With a true interest-only loan, your payment covers all the interest that accrues, so the balance stays the same. With a negative amortization loan, your payment is less than the interest, so the unpaid interest is added to the principal, and your balance grows over time. Negative amortization loans are riskier and less common.

Why is the total interest so much higher on an interest-only loan? Because you pay interest on the full principal for the entire interest-only period, and then you repay the principal over a shorter time. The interest is calculated on a larger average balance for longer, so the total interest is higher than a standard amortizing loan of the same amount and rate.

Can I convert an interest-only loan to a standard loan later? Some loans allow conversion, but it is not automatic. You would typically need to refinance or exercise a conversion option in your contract. Refinancing may involve new fees and a new rate. Always check your loan documents or ask your lender about conversion options.

This calculator provides an estimate based on the inputs you enter. Your lender’s official loan disclosure will show the exact payment schedule, including any fees or rate adjustments.

Related

Formula used
in p | Loan amount | $ | 20000 | 1 | 100000000
in apr | Interest rate (APR) | % | 8 | 0.01 | 100
in yrs | Interest-only period | years | 3 | 0.0833 | 50
in term | Total loan term | years | 5 | 0.0833 | 50
out pmt_io | Interest-only payment | $ | p * (apr / 1200) | 2
out bal | Balance after IO period | $ | p | 2
out pmt_am | Amortizing payment after IO | $ | bal * (apr / 1200) / (1 - (1 + apr / 1200) ^ -((term - yrs) * 12)) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.

More in this section

The whole Loan payments section →