calculate-loan

01 Loan payments

Interest Only Loan Comparison: How They Work

Calculator No. 01-22025 · Updated · Formula and assumptions shown below

Interest-only payment $1,000.00
Amortizing payment (full term)
$1,199.10
Level-payment formula, rounded to the cent
Balance after IO period
$200,000.00
= Loan amount
Payment after IO period
$1,288.60
Level-payment formula, rounded to the cent
You enter
Loan amount ($), Interest rate (APR) (%), Interest-only period (years), Total loan term (years)
You get
Interest-only payment ($), Amortizing payment (full term) ($), Balance after IO period ($), Payment after IO period ($)
Rounding
2 dp

Estimate for education, not financial advice. The result follows from the numbers you enter and the formula shown. It is not a quote or an offer, and it does not include fees, taxes or insurance unless the calculator asks for them. Ask your lender for the exact figures.

An interest-only loan lets you pay only the interest for a set period, so your monthly payment is lower than a standard amortizing loan, but you do not build equity during that time. This article compares interest-only loans to traditional loans, explains the costs, and shows you the math behind the payments.

Formula

For the interest-only period, the monthly payment is simply the loan amount times the monthly interest rate:

Interest-only payment = P × (APR / 1200)

Where:

  • P = loan amount (principal) in dollars
  • APR = annual percentage rate (e.g., 6 for 6%)
  • APR / 1200 = monthly interest rate (APR divided by 12 months, then divided by 100 to convert percent to decimal)

After the interest-only period ends, the loan typically converts to a fully amortizing loan over the remaining term. The payment then uses the standard amortization formula:

Amortizing payment = B × (r) / (1 – (1 + r)^-n)

Where:

  • B = balance at the start of the amortization period (usually the original loan amount, because you paid no principal)
  • r = monthly interest rate (APR / 1200)
  • n = number of remaining months (total term in years minus interest-only years, times 12)

Worked Example

Using the default values: loan amount $200,000, APR 6%, interest-only period 5 years, total term 30 years.

Step 1: Calculate the monthly interest rate.
r = 6 / 1200 = 0.005 (0.5% per month)

Step 2: Interest-only payment.
Payment = 200,000 × 0.005 = $1,000.00 per month

Step 3: Amortizing payment for the full 30-year term (for comparison).
n = 30 × 12 = 360 months
Payment = 200,000 × 0.005 / (1 – (1.005)^-360)
(1.005)^-360 ≈ 0.166041
Payment = 1,000 / (1 – 0.166041) = 1,000 / 0.833959 ≈ $1,199.10

Step 4: Balance after the 5-year interest-only period.
Since you paid no principal, the balance remains $200,000.

Step 5: Payment after the interest-only period (remaining 25 years).
n = (30 – 5) × 12 = 300 months
Payment = 200,000 × 0.005 / (1 – (1.005)^-300)
(1.005)^-300 ≈ 0.223823
Payment = 1,000 / (1 – 0.223823) = 1,000 / 0.776177 ≈ $1,288.37

So with the default inputs, you pay $1,000 per month for the first 5 years, then $1,288.37 per month for the remaining 25 years. The fully amortizing loan would have been $1,199.10 per month for all 30 years.

Assumptions

  • The interest rate is fixed for the entire loan term.
  • Interest is compounded monthly at APR / 12.
  • During the interest-only period, you make no principal payments.
  • After the interest-only period, the loan amortizes over the remaining term at the same rate.
  • This calculator does not include fees, taxes, insurance, or mortgage insurance.

How Interest-Only Loans Work

Interest-only loans are structured with two phases. In the first phase, which typically lasts 5 to 10 years, your monthly payment covers only the interest that accrues on the loan. The principal balance does not decrease. In the second phase, the loan becomes a standard amortizing loan, and your payment jumps to cover both principal and interest over the remaining term.

The key difference from a traditional loan is that a traditional loan’s payment includes principal from the very first month. That means each payment slowly reduces your debt, and your equity grows. With an interest-only loan, you are essentially renting the money for the first few years.

Some interest-only loans are adjustable-rate mortgages (ARMs), meaning the interest rate can change after the initial period. Others are fixed-rate. The calculator above assumes a fixed rate for simplicity, but you should check your specific loan terms.

Comparing Interest-Only vs. Amortizing Loans

The main trade-off is lower initial payments versus higher total cost and no equity growth. Here is a direct comparison using the example above:

  • Monthly payment (first 5 years): Interest-only = $1,000; Amortizing = $1,199.10
  • Monthly payment (years 6-30): Interest-only = $1,288.37; Amortizing = $1,199.10
  • Total interest over 30 years: Interest-only = 60 × $1,000 + 300 × $1,288.37 – $200,000 = $60,000 + $386,511 – $200,000 = $246,511; Amortizing = 360 × $1,199.10 – $200,000 = $431,676 – $200,000 = $231,676
  • Equity after 5 years: Interest-only = $0 (assuming no appreciation); Amortizing = $200,000 – (remaining balance). The amortizing loan balance after 60 payments is about $186,000, so equity is about $14,000.

In this example, the interest-only loan costs about $14,835 more in interest over 30 years. The exact numbers depend on your rate and term.

When an Interest-Only Loan Might Make Sense

Interest-only loans are not inherently good or bad, but they fit certain situations better than others. Common scenarios where borrowers consider them include:

  • Cash flow management: If you expect your income to rise significantly in a few years, the lower initial payment can free up cash now.
  • Short-term ownership: If you plan to sell the property before the interest-only period ends, you may not care about building equity.
  • Investment properties: Some investors use interest-only loans to maximize cash flow while relying on property appreciation for profit.
  • Bonus-heavy income: If you receive large annual bonuses, you might use the lower monthly payment and make lump-sum principal payments when the bonus arrives.

However, these scenarios rely on assumptions about future income, property values, and interest rates. If those assumptions fail, you could face a higher payment later or negative equity if property values drop.

Common Problems and Risks

The biggest risk is payment shock. When the interest-only period ends, your payment can increase dramatically—in the example above, it jumps by about 29%. If you have not planned for that increase, it can strain your budget.

Another problem is negative amortization. Some interest-only loans allow your payment to be less than the interest due, causing the unpaid interest to be added to your principal. This makes your debt grow over time. The calculator above assumes you pay exactly the interest due, so negative amortization does not occur.

Finally, because you build no equity, you are more vulnerable to market downturns. If property values fall, you could owe more than the property is worth, making it difficult to refinance or sell without bringing cash to closing.

How to Choose Between Interest-Only and Amortizing

To decide, you need to compare the total costs and your own financial situation. Here is a practical approach:

  1. Run the numbers with the calculator above using your actual loan amount, rate, and terms.
  2. Compare the interest-only payment to the amortizing payment. Can you comfortably afford the amortizing payment now? If yes, you are probably better off with the amortizing loan because you build equity and pay less interest over time.
  3. If you cannot afford the amortizing payment, ask yourself why. Is it a short-term cash flow issue? If so, an interest-only loan might help, but you must have a concrete plan for the payment increase later.
  4. Consider what you will do with the money you save each month during the interest-only period. If you invest it and earn a return higher than your loan rate, you could come out ahead. If you spend it, you are worse off.
  5. Check the loan terms: Is the rate fixed or adjustable? What is the maximum payment increase? Are there prepayment penalties?

Remember, the calculator gives an estimate. Your lender’s disclosure will show the exact payment schedule, including any rate adjustments and fees.

Alternatives to Interest-Only Loans

If you want lower payments but still want to build equity, consider these alternatives:

  • Longer amortization term: A 40-year loan has lower payments than a 30-year loan, but you still pay some principal each month.
  • Biweekly payments: Making half your payment every two weeks results in one extra payment per year, which shortens your loan term and builds equity faster.
  • Piggyback loan: A second mortgage can help you avoid private mortgage insurance, but it adds another payment and usually has a higher rate.
  • Balloon loan: You make interest-only or reduced payments for a few years, then pay off the entire balance in one lump sum. This is riskier because you must refinance or sell at that point.

Each alternative has its own costs and risks. The right choice depends on your income stability, investment opportunities, and how long you plan to keep the loan.

Frequently Asked Questions

What happens after the interest-only period ends? The loan converts to a fully amortizing loan over the remaining term, and your payment increases to cover both principal and interest. The exact increase depends on the remaining balance, the interest rate, and the remaining term.

Can I pay extra principal during the interest-only period? Yes, most loans allow it, but check for prepayment penalties. If you pay extra, your balance will be lower than the original amount, and your payment after the interest-only period will be lower than the calculator shows.

Are interest-only loans available for any loan type? They are most common on mortgages, but some home equity lines of credit (HELOCs) also have interest-only periods. Auto loans and personal loans rarely have this feature because the collateral depreciates quickly.

Is an interest-only loan the same as a negative amortization loan? No. With a true interest-only loan, your payment covers all the interest due, so the balance stays the same. With negative amortization, your payment is less than the interest due, so the balance increases.

Why would a lender offer an interest-only loan? Lenders offer them because they attract borrowers who want lower initial payments. The lender still earns interest, and the higher payment later reduces the lender’s risk of not recovering the principal quickly.

Do interest-only loans have higher interest rates? Sometimes, but not always. The rate depends on the lender, the loan type, and your credit. You should compare the APR of an interest-only loan to a traditional loan to see which is more cost-effective.

This calculator provides an estimate for educational purposes. Your lender’s loan estimate and closing disclosure will give you the exact figures for your specific loan.

Related

Formula used
in p | Loan amount | $ | 200000 | 1 | 100000000
in apr | Interest rate (APR) | % | 6 | 0.01 | 100
in yrs | Interest-only period | years | 5 | 0.0833 | 50
in term | Total loan term | years | 30 | 1 | 50
out io_pmt | Interest-only payment | $ | p * (apr / 1200) | 2
out am_pmt | Amortizing payment (full term) | $ | p * (apr / 1200) / (1 - (1 + apr / 1200) ^ -(term * 12)) | 2
out bal | Balance after IO period | $ | p | 2
out am_after | Payment after IO period | $ | bal * (apr / 1200) / (1 - (1 + apr / 1200) ^ -((term - yrs) * 12)) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.

More in this section

The whole Loan payments section →