This calculator compares the interest-only payment on an equity-release loan with the amount of interest added if it is left unpaid. Enter the amount borrowed, the annual interest rate and the period; it estimates monthly interest, the balance after that period if interest is rolled up, and the difference between those outcomes.
Formula
The first result is the interest due each month when the borrower pays interest as it accrues and does not repay any principal during the comparison period:
Monthly interest-only payment = round(P × (APR ÷ 1,200), 2)
Here, P is the amount released in dollars and APR is the annual percentage rate entered as a percentage. Dividing by 1,200 converts a quoted annual percentage into a monthly rate, using APR divided by 12 months. The result is rounded to cents.
For the rolled-up scenario, the monthly interest is added to the balance rather than paid. With monthly compounding, the estimated balance after the comparison period is:
Balance = P × (1 + APR ÷ 1,200)12 × Y
Y is the comparison period in years. The final output, the extra balance from rolled-up interest, is the estimated rolled-up balance minus the original amount. It is not a fee estimate or a quote for a specific product.
Worked Example
Using the calculator’s default values—$50,000 released, 6% APR and 10 years—the monthly rate is 6 ÷ 1,200 = 0.005, or 0.5%.
- Monthly interest-only payment: $50,000 × 0.005 = $250.00. If that interest is paid each month, the principal remains $50,000 in this simplified example.
- Number of monthly periods: 10 × 12 = 120.
- Rolled-up balance: $50,000 × (1.005)120 = $90,963.68, rounded to cents.
- Extra balance attributable to rolled-up interest: $90,963.68 − $50,000 = $40,963.68.
The comparison assumes the rate stays unchanged and interest is added monthly in the rolled-up scenario. Actual product terms and calculation methods may differ.
Assumptions
- The interest rate is fixed for the calculation period; no rate changes are modelled.
- Interest is calculated monthly at APR divided by 12, with monthly compounding in the rolled-up scenario.
- For the interest-only payment, interest is paid monthly and principal is not reduced.
- Payments are treated as occurring at the end of each monthly period for the rolled-up calculation.
- Fees, taxes, insurance, legal costs, product-specific charges, and changes to the property value are not included.
What Interest-Only Equity Release Means
Equity release describes borrowing secured against a home, with repayment arrangements that can differ by product. In an interest-only arrangement, the borrower pays interest regularly while the original loan balance remains outstanding, unless separate repayments reduce it. This is different from a repayment loan, where scheduled payments normally cover both interest and some principal.
Some arrangements instead allow interest to be added to the amount owed. That avoids a monthly interest payment, but the balance can grow because later interest is calculated on a larger amount. This calculator compares these two simplified paths; it does not establish whether a particular equity-release contract offers either option or what its terms require.
How to Compare Results
Use the same release amount, assumed rate and time horizon for each scenario. The monthly figure answers a cash-flow question: how much interest would be due each month under the interest-only assumption? The rolled-up balance answers a different question: what could the debt become if interest compounds and is not paid? The difference illustrates the effect of compounding, not a complete comparison of product costs.
For instance, the example’s $250 monthly interest payment would total $30,000 over 120 months if the rate and payment stayed constant. That cash total is not included in the rolled-up balance, since the two outputs represent separate scenarios. Do not add the $30,000 to the rolled-up balance as though both happened in the same arrangement.
- Check whether the rate is fixed or can change, and whether the quoted rate is an APR or another rate measure.
- Confirm how often interest is calculated and whether unpaid interest is added to the balance.
- Ask for a full illustration that includes fees and any conditions affecting payments or repayment.
- Compare the expected balance at the same date, not just the first monthly payment.
Limits and Common Misunderstandings
The calculator treats the rate as constant, uses monthly compounding and assumes no withdrawals after the initial release. Real contracts may use different conventions, include charges, allow rates to change, or have other repayment rules. A lender’s illustration and contract are needed to understand those details. The input rate is only an example unless replaced with a figure supplied for the product being assessed.
A low or zero monthly payment does not mean borrowing is cost-free. If interest is rolled up, the debt can increase over time and may reduce the equity remaining in the property. Conversely, an interest-only payment generally does not reduce principal by itself. The calculation also says nothing about future property value, the amount eventually repayable under a contract, eligibility, or whether a product is suitable for an individual.
Frequently Asked Questions
Does an interest-only equity-release payment reduce the loan balance?
No. In this calculator’s interest-only scenario, the payment covers the interest only, so the original principal stays unchanged. Extra principal repayments, if allowed and made, would change that result.
What happens if I do not pay the interest?
Depending on the contract, unpaid interest may be added to the outstanding balance and later interest may be calculated on that larger balance. The calculator models this as monthly compounding, but the actual contract determines the method.
Why does the rolled-up balance rise faster over time?
Each period’s interest is added to the balance, so subsequent interest is calculated on both the original amount and previously accumulated interest. This is compounding.
Is the calculator’s result a quote for an equity-release plan?
No. It is an arithmetic illustration based on the inputs and assumptions shown. Product rates, fees, calculation conventions and contractual terms are not looked up or included.
Can I compare different release amounts or rates?
Yes. Change the amount, APR or comparison period and calculate again. For a meaningful comparison, use figures and time periods that match the written product information, and keep the assumptions consistent.
The result is an estimate; the lender’s disclosure gives the exact figures.
Related
Formula used
in p | Amount released | $ | 50000 | 1 | 100000000 in apr | Interest rate (APR) | % | 6 | 0.01 | 100 in yrs | Comparison period | years | 10 | 0.0833 | 50 out pmt | Monthly interest-only payment | $ | round(p * (apr / 1200), 2) | 2 out bal | Balance if interest is rolled up | $ | p * (1 + apr / 1200) ^ (yrs * 12) | 2 out diff | Extra balance from rolled-up interest | $ | bal - p | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.
More in this section
- June Balance Date: What It Means for Loan Balances$405.53
- L&T Finance Gold Loan: How It Works and What to Check
- Journal Entry to Correct a Beginning Balance
- JS Bank Gold Loan: Eligibility, Process and Costs
- Journal Entry for a Bank Loan: Debit and Credit$20,000.00
- Journal Entry to Adjust Beginning Balance