This calculator estimates the down payment needed to reach a loan-to-value ratio that may avoid private mortgage insurance (PMI) on a conventional mortgage. Enter the home price and your target down-payment percentage to see the required down payment and loan amount; confirm whether PMI applies with your lender.
Formula
Required down payment = home price × target down-payment percentage ÷ 100. Estimated loan amount = home price − required down payment. Loan-to-value (LTV) ratio = estimated loan amount ÷ home price × 100.
- price is the home price in dollars.
- target is the down payment percentage, from 0.01% through 100%.
- down is the calculated down payment in dollars.
- loan is the calculated mortgage principal in dollars, before any financed costs.
- ltv is the resulting loan-to-value ratio as a percentage.
The 20% target is an example setting, not a universal PMI cutoff. PMI requirements depend on the loan type, transaction, lender and applicable rules. The calculator shows the arithmetic for a target you choose; it does not determine whether a lender will require mortgage insurance.
Worked Example
Using the calculator’s defaults: home price = $300,000 and target down payment = 20%.
- Calculate the down payment: $300,000 × 20 ÷ 100 = $60,000.
- Subtract it from the price: $300,000 − $60,000 = $240,000 estimated loan amount.
- Calculate LTV: $240,000 ÷ $300,000 × 100 = 80.00%.
The results are rounded to cents for dollar amounts and two decimal places for LTV. This example calculates a down payment and estimated starting LTV; it does not establish PMI eligibility or account for closing costs.
Assumptions
- The home price is the full purchase price and the down payment is paid toward that price.
- The estimated loan amount is price minus down payment; it excludes costs added to the loan.
- This is a one-time purchase calculation, not an amortization or payment schedule.
- Not included: lender charges, taxes, homeowners insurance, escrow, mortgage insurance premiums, prepaid costs, or changes in property value.
When to Use This Calculation
Use it to compare down-payment scenarios while planning a home purchase. If your goal is to avoid PMI, first ask the lender what mortgage-insurance rules apply to the exact loan being considered. Then enter that target percentage to estimate the cash contribution toward the price and the resulting starting loan balance.
A down payment is only one part of cash needed at closing. You may also need funds for closing costs, prepaid items, inspections or reserves, depending on the transaction. Those amounts are not included here, so do not treat the down-payment result as a complete cash-to-close estimate.
Loan-to-value is generally calculated by dividing the loan amount by the value used for the lender’s calculation. This tool uses the purchase price as that value. A lender may use a different valuation or apply other rules, so its LTV determination may differ. If costs are financed, the final loan balance can also exceed the simple price-minus-down-payment figure.
Step-by-Step
- Get the home price. Use the agreed purchase price for a purchase estimate. For a refinance or another transaction, this calculator’s purchase-price assumption may not fit; ask the lender what value and loan balance it uses.
- Ask what target applies. Contact the lender or review the loan estimate or other loan disclosures for the mortgage-insurance requirement and how LTV is assessed. Do not assume that a particular down payment automatically removes PMI.
- Enter the price. Type the dollar amount without subtracting your down payment. The input must be at least $1.
- Enter a target percentage. For example, enter 20 for a 20% down-payment scenario. The tool accepts percentages from 0.01 to 100.
- Review the required down payment and estimated loan. Compare the calculated down payment with the funds you expect to put toward the price. Separately account for costs and other cash needs.
- Check the LTV result with the lender. Ask whether the result satisfies the terms for the specific mortgage, and whether mortgage insurance is required, how it is charged, and what conditions apply to ending it. Get the answer in writing where possible.
- Recalculate other scenarios. Change the target percentage or price to see how the arithmetic changes. Treat each result as an estimate, not a promise of approval, a quote, or a determination of PMI status.
Common Mistakes
- Treating 20% as a guarantee. A 20% down payment is a common planning benchmark, but PMI treatment can vary by loan type and lender. Verify the specific terms.
- Confusing down payment with total cash needed. The calculated figure applies only to the purchase price. Closing expenses and prepaid amounts are outside the formula.
- Entering a dollar amount as a percentage. Enter 20 for 20%, not 0.20 or $20, unless your intended target is actually 0.20%.
- Assuming the purchase price is always the LTV value. A lender’s valuation and underwriting method may affect the LTV it uses.
- Ignoring financed costs or other liens. Costs added to principal or other relevant debt can change the lender’s calculation, while this simple estimate excludes them.
- Assuming PMI and other mortgage insurance are interchangeable. Names and rules differ across products. Ask what type of coverage the loan requires and how it works.
Tips
- Request a written breakdown showing the proposed loan amount, the LTV calculation, any mortgage-insurance charge and its conditions.
- Compare several down-payment scenarios, but keep cash for costs and reserves in a separate budget.
- Ask whether a different loan structure has different insurance requirements and costs; compare full disclosed terms rather than the down payment alone.
- Save the assumptions used for each calculation, including price, target percentage and whether any costs are financed.
Troubleshooting
The result does not match the lender’s number: Check whether the lender uses an appraisal or another value, includes financed costs, or evaluates the transaction differently. Ask for its figures and calculation method.
The lender says PMI still applies: The calculator only computes a percentage and estimated LTV. Ask the lender which loan condition triggers insurance and what options, if any, are available under that loan’s terms.
You cannot reach the target down payment: Recalculate with the amount you can put toward the price to see the resulting loan and LTV. Discuss the available loan terms and associated insurance costs with the lender; this calculator does not judge whether a choice fits your finances.
Your cash-to-close estimate is higher: Add the lender’s disclosed closing costs, prepaid items and other required amounts separately. They are not part of this calculation.
Frequently Asked Questions
What is PMI?
PMI is private mortgage insurance that may be required for certain conventional mortgages. Whether it applies and how it works depends on the loan terms.
Does putting 20% down always avoid PMI?
No universal guarantee applies. Ask the lender to confirm the requirement for the specific loan, including its LTV calculation and conditions.
Can I avoid PMI with less than 20% down?
Some loan structures may have different insurance arrangements, but terms and costs vary. Compare the written disclosures and ask the lender directly; this calculator does not model those products.
Can I remove PMI later?
Possibility and conditions depend on the mortgage and applicable rules. Ask the servicer for the exact requirements and process rather than relying on an estimated home value or this calculator.
Does this include closing costs?
No. It estimates only the down payment, loan amount and starting LTV from price and target percentage.
Is the result a quote or approval?
No. It is estimate arithmetic for education; the lender’s disclosure gives the exact figures.
Related
Formula used
in price | Home price | $ | 300000 | 1 | 100000000 in target | Target down payment | % | 20 | 0.01 | 100 out down | Down payment needed | $ | price * target / 100 | 2 out loan | Loan amount | $ | price - down | 2 out ltv | Loan-to-value ratio | % | loan / price * 100 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.
More in this section
- Avalanche Game Schedule: Dates, Times and Where to Check
- Avalanche Hockey Schedule: Games, Dates and TV
- Avalanche Debt Payoff Tracker Calculator
- Avalanche Debt Repayment Calculator and Payoff Plan
- Avalanche Debt Payoff Calculator and Spreadsheet
- Avalanche Debt Payoff Calculator: Free Estimate