calculate-loan

01 Loan payments

Compare Refinance Terms: A Step-by-Step Guide

Calculator No. 01-26811 · Updated · Formula and assumptions shown below

Current monthly payment $1,491.15
New monthly payment
$1,375.77
Level-payment formula, rounded to the cent
Monthly savings
$115.37
= Current monthly payment − new monthly payment
Months to break even
$43.3
= Closing costs & fees ÷ (current monthly payment − new monthly payment)
You enter
Current loan balance ($), Current APR (%), Current remaining term (years), New APR (%), New loan term (years), Closing costs & fees ($)
You get
Current monthly payment ($), New monthly payment ($), Monthly savings ($), Months to break even ($)
Rounding
2 dp · 1 dp

Estimate for education, not financial advice. The result follows from the numbers you enter and the formula shown. It is not a quote or an offer, and it does not include fees, taxes or insurance unless the calculator asks for them. Ask your lender for the exact figures.

Comparing refinance terms helps you see which loan offer actually saves you money over time, not just which has the lowest monthly payment. You’ll compare interest rates, loan terms, fees, and total costs side by side. Before you start, gather your current loan statement and any refinance quotes you’ve received from lenders.

Formula

The calculator uses the standard fixed-rate loan payment formula to find the monthly payment for both your current and new loan terms. The monthly payment is calculated as:

PMT = P × (r / (1 – (1 + r)^(-n)))

Where:

  • P = loan principal (current balance) in dollars
  • r = monthly interest rate (APR divided by 12, then by 100 to convert percentage to decimal)
  • n = total number of monthly payments (loan term in years × 12)

Monthly savings = current payment − new payment. Break-even months = total closing costs ÷ monthly savings.

Worked Example

Using the default values: current balance $200,000, current APR 6.5%, current remaining term 20 years, new APR 5.5%, new term 20 years, closing costs $5,000.

Current monthly payment:
r = 6.5 / 1200 = 0.0054167
n = 20 × 12 = 240
PMT = 200000 × (0.0054167 / (1 – (1 + 0.0054167)^(-240)))
PMT = 200000 × (0.0054167 / (1 – 0.2736))
PMT = 200000 × (0.0054167 / 0.7264)
PMT = 200000 × 0.007457
PMT = 1491.43

New monthly payment:
r = 5.5 / 1200 = 0.0045833
n = 240
PMT = 200000 × (0.0045833 / (1 – (1 + 0.0045833)^(-240)))
PMT = 200000 × (0.0045833 / (1 – 0.3329))
PMT = 200000 × (0.0045833 / 0.6671)
PMT = 200000 × 0.006870
PMT = 1374.00

Monthly savings: 1491.43 − 1374.00 = 117.43

Break-even months: 5000 / 117.43 = 42.6 months (about 3.5 years)

So you would recover the $5,000 in closing costs after about 43 months, and then start saving money.

Assumptions

  • Both loans are fixed-rate with level monthly payments.
  • Payments are made at the end of each month.
  • Interest compounds monthly at APR / 12.
  • Closing costs are paid upfront in cash; they are not rolled into the new loan.
  • This calculator does not include property taxes, insurance, PMI, or other fees.

Step-by-Step

  1. Gather your current loan details. Find your latest mortgage or loan statement. Note the current balance, current APR, and remaining term (how many years left). If you’re not sure, call your lender or check your online account.
  2. Collect refinance quotes. Contact at least three lenders or use online comparison tools. Ask each for a Loan Estimate (for mortgages) or a written quote showing the new APR, loan term, and all closing costs. Make sure the quotes are for the same type of loan (e.g., fixed-rate 20-year) so you compare apples to apples.
  3. Enter your current loan details into the calculator. Use the current balance, current APR, and remaining term. This gives you your baseline monthly payment.
  4. Enter the new loan details for each quote. For each refinance offer, input the new APR, new loan term, and total closing costs. The calculator will show the new monthly payment, monthly savings, and break-even months.
  5. Compare the monthly payments. Look at the new monthly payment versus your current one. A lower payment is attractive, but check the term: if you extend the term, you may pay more interest over time even with a lower payment.
  6. Calculate the break-even point. The break-even months tell you how long it takes to recoup the closing costs. If you plan to stay in the home (or keep the loan) longer than the break-even period, the refinance may make sense; if you might move sooner, it likely won’t.
  7. Check the total interest over the life of the loan. Use a separate amortization calculator or ask the lender for the total interest paid. Compare the total interest of your current loan (if you keep it) versus the new loan. A lower APR doesn’t always mean less total interest if you extend the term.
  8. Review fees and hidden costs. Look beyond the APR: origination fees, appraisal fees, title insurance, prepayment penalties, and any points. Add all fees to the closing costs input. If a lender quotes a very low APR but high fees, your break-even may be longer.
  9. Consider the loan term carefully. A shorter term (e.g., 15 years) usually has a lower APR but higher monthly payment. A longer term (e.g., 30 years) lowers the payment but increases total interest. Use the calculator to see how the term affects your payment and break-even.
  10. Decide based on your goals. Are you trying to lower monthly payments, pay off the loan faster, or reduce total interest? Your goal determines which terms are most favorable. The calculator gives you the numbers; you decide what fits your situation.

Common Mistakes

  • Comparing APRs without considering fees. A slightly higher APR with lower fees can be cheaper than a low APR with high fees. Always factor in closing costs.
  • Ignoring the loan term. Extending a 20-year loan to 30 years lowers the payment but adds years of interest. Compare the total interest, not just the monthly payment.
  • Forgetting to include all closing costs. Points, appraisal, title search, and other fees add up. If you don’t include them, your break-even will be too short.
  • Using the wrong balance. If you roll closing costs into the new loan, the new principal is higher. The calculator assumes you pay fees upfront. Adjust the balance if you finance the fees.
  • Not checking the APR vs. interest rate. APR includes fees, so it’s a better comparison. But make sure you’re comparing the same type of APR (fixed vs. adjustable).
  • Assuming you’ll stay in the home forever. If you might move in a few years, a long break-even means you’ll lose money.

Tips

  • Get quotes from at least three lenders to ensure you’re getting a competitive deal.
  • Ask each lender for a Loan Estimate (for mortgages) and compare the ‘Total Closing Costs’ line.
  • Use the same loan term for all quotes to isolate the effect of the interest rate.
  • Consider a no-closing-cost refinance if you plan to stay only a short time, but note that the APR will be higher.
  • If you’re refinancing to consolidate debt, factor in the total monthly debt payments, not just the mortgage.
  • Run the numbers with a slightly higher APR to see how sensitive your savings are to rate changes.

Troubleshooting

  • The calculator shows ‘Cannot compute’ for break-even. This happens when your new payment is higher than your current payment (negative savings). Check that you entered the new APR correctly and that the term isn’t dramatically shorter. If the new payment is higher, you won’t save monthly, so break-even doesn’t apply.
  • Your monthly savings seem too high or too low. Double-check the current balance and APRs. A small error in the APR can change the payment significantly. Also verify the remaining term—if you’re 10 years into a 30-year loan, the remaining term is 20 years, not 30.
  • You’re not sure about the closing costs. If a lender hasn’t given you a final figure, use an estimate from the Loan Estimate or ask for a breakdown. You can also use a range (e.g., $3,000–$7,000) to see how break-even changes.
  • The new loan has an adjustable rate. This calculator only works for fixed-rate loans. For ARMs, the payment can change, so this comparison is not accurate. Ask the lender for a worst-case scenario payment.
  • You plan to pay extra each month. The calculator assumes level payments. If you plan to make extra payments, the break-even will be shorter, but the formula won’t capture that. Use an amortization calculator with extra payments for a more precise picture.

Frequently Asked Questions

Q: What is the difference between interest rate and APR?
A: The interest rate is the cost of borrowing the principal, while APR includes the interest rate plus certain fees and costs, expressed as a yearly rate. APR gives a more complete picture of the loan’s cost.

Q: How long does it take to break even on a refinance?
A: Break-even is the number of months it takes for your monthly savings to cover the closing costs. Divide total closing costs by monthly savings. If you stay longer than that, you save money; if you leave sooner, you lose.

Q: Can I refinance if my credit score has dropped?
A: Yes, but you may get a higher APR or be denied. Lenders assess your credit score, debt-to-income ratio, and equity. It’s best to check your credit report and improve your score before applying.

Q: Should I refinance to a shorter term?
A: A shorter term (e.g., 15 years) often has a lower APR and you pay less total interest, but your monthly payment will be higher. Use the calculator to see if the higher payment fits your budget.

Q: Are closing costs tax-deductible?
A: Some closing costs, like points, may be tax-deductible if you itemize, but this depends on your situation and tax laws. Consult a tax professional for advice.

Q: What if I plan to move in two years?
A: If your break-even is longer than two years, refinancing likely won’t save you money. You’d need a very low APR and low fees to make it worthwhile. Consider a no-closing-cost refinance if you still want to lower your payment.

This calculator provides an estimate for educational purposes. Your lender’s official disclosure will give you the exact figures.

Related

Formula used
in p | Current loan balance | $ | 200000 | 1 | 100000000
in apr | Current APR | % | 6.5 | 0.01 | 100
in yrs | Current remaining term | years | 20 | 0.0833 | 50
in n_apr | New APR | % | 5.5 | 0.01 | 100
in n_yrs | New loan term | years | 20 | 0.0833 | 50
in fees | Closing costs & fees | $ | 5000 | 0 | 1000000
out pmt | Current monthly payment | $ | p * (apr / 1200) / (1 - (1 + apr / 1200) ^ -(yrs * 12)) | 2
out n_pmt | New monthly payment | $ | p * (n_apr / 1200) / (1 - (1 + n_apr / 1200) ^ -(n_yrs * 12)) | 2
out savings | Monthly savings | $ | pmt - n_pmt | 2
out breakeven | Months to break even | $ | fees / (pmt - n_pmt) | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.

More in this section

The whole Loan payments section →