calculate-loan

01 Loan payments

Home Refinance Quote Comparison: How to Do It

Calculator No. 01-26807 · Updated · Formula and assumptions shown below

New monthly payment $1,199.10
Total interest (new loan)
$231,676.38
= New monthly payment × new loan term × 12 − current loan balance
Total cost (interest + fees)
$236,676.38
= Total interest (new loan) + total closing costs
Current loan balance
$200,000
Input
You enter
Current loan balance ($), New interest rate (APR) (%), New loan term (years), Total closing costs ($)
You get
New monthly payment ($), Total interest (new loan) ($), Total cost (interest + fees) ($)
Rounding
2 dp

Estimate for education, not financial advice. The result follows from the numbers you enter and the formula shown. It is not a quote or an offer, and it does not include fees, taxes or insurance unless the calculator asks for them. Ask your lender for the exact figures.

Comparing home refinance quotes means gathering loan estimates from multiple lenders and comparing the interest rate, APR, closing costs, and monthly payment side by side. You enter your current loan balance, desired new rate, and term into the calculator below to see how different offers change your payment and total interest.

Formula

The calculator uses the standard fixed-rate mortgage payment formula:

Monthly payment = P × (r × (1 + r)^n) / ((1 + r)^n – 1)

Where:

  • P = loan principal (your current balance, in dollars)
  • r = monthly interest rate = annual rate (APR) ÷ 12, expressed as a decimal (e.g., 6% APR → 0.06/12 = 0.005)
  • n = total number of monthly payments = term in years × 12

Total interest = monthly payment × n − P. Total cost = total interest + closing costs (fees).

Worked Example

Using the default values: balance = $200,000, APR = 6%, term = 30 years, fees = $5,000.

  1. Monthly rate r = 6 / 1200 = 0.005
  2. Number of payments n = 30 × 12 = 360
  3. Monthly payment = 200000 × (0.005 × (1.005)^360) / ((1.005)^360 − 1)
  4. (1.005)^360 ≈ 6.0226
  5. Payment = 200000 × (0.005 × 6.0226) / (6.0226 − 1) = 200000 × 0.030113 / 5.0226 ≈ 200000 × 0.005996 = 1199.10
  6. Total interest = 1199.10 × 360 − 200000 = 431,676 − 200,000 = 231,676
  7. Total cost = 231,676 + 5,000 = 236,676

The calculator shows a monthly payment of $1,199.10, total interest of $231,676, and total cost of $236,676.

Assumptions

  • Fixed interest rate for the entire new loan term.
  • Payments are made monthly, at the end of each month.
  • Interest compounds monthly at APR ÷ 12.
  • Closing costs are paid upfront and are not financed into the loan.
  • Not included: property taxes, homeowners insurance, PMI, escrow, prepayment penalties, or any lender-specific fees.

Why Compare Quotes at All?

Refinance quotes can vary by thousands of dollars in closing costs and by a quarter point or more in interest rate, even for the same borrower and loan amount. Lenders set their own pricing based on their cost of funds, overhead, and profit margin, and they may offer different rates for the same loan product. Comparing quotes helps you see which lender offers the lowest total cost, not just the lowest monthly payment.

For example, a lender offering a 6.0% rate with $5,000 fees might have a lower monthly payment than one offering 5.875% with $8,000 fees, but the higher fees could make the second loan more expensive over the long run. The calculator above lets you plug in each quote’s rate, term, and fees to see the total cost.

How to Get Accurate Quotes

To get comparable quotes, follow these steps:

  • Request a Loan Estimate (a standardized form) from each lender. This form lists the rate, APR, monthly payment, and itemized closing costs.
  • Provide the same information to every lender: loan amount, property value, credit score range, loan term, and loan type (e.g., conventional fixed-rate).
  • Ask for quotes on the same day, because rates change daily.
  • Compare the APR (annual percentage rate), which includes most fees, not just the interest rate.
  • Check the closing costs section for origination fees, appraisal, title insurance, and recording fees.

Be aware that some lenders advertise low rates but add high origination fees, while others offer no-fee refinances but a slightly higher rate. The calculator helps you see the trade-off.

Key Factors to Compare

When you have multiple Loan Estimates, focus on these numbers:

  • Interest rate – determines your monthly payment and total interest.
  • APR – reflects the true cost of borrowing, including fees.
  • Monthly payment – the amount you’ll pay each month.
  • Total closing costs – upfront fees you’ll pay at closing.
  • Loan term – 15-year vs. 30-year changes payment and total interest significantly.
  • Prepayment penalty – some loans charge a fee if you pay off early; ask if it applies.
  • Rate lock – a locked rate protects you from increases before closing; a float means the rate can change.

Also consider the break-even point: divide total closing costs by the monthly savings from refinancing. If you save $200 per month and costs are $5,000, it takes 25 months to break even. If you plan to move before that, refinancing may not be worth it.

Common Pitfalls in Comparison

Many borrowers make the mistake of comparing only the interest rate. A lower rate with high fees can be worse than a slightly higher rate with no fees, especially if you plan to keep the loan for a short time. Another pitfall is ignoring the loan term: a 15-year refinance usually has a lower rate but a much higher monthly payment than a 30-year.

Also, beware of quotes that exclude certain fees. The Loan Estimate should list all costs, but some lenders may not include title insurance or appraisal if they assume you’ll use their preferred providers. Ask each lender to include all third-party fees so the quotes are truly comparable.

Finally, don’t forget that your credit score affects the rate you’re offered. A higher score generally gets a lower rate. If your score has improved since you took your original mortgage, you may qualify for a better rate now.

How to Use the Calculator for Comparison

Enter your current loan balance (the amount you still owe), the new rate offered by a lender, the new term, and the total closing costs. The calculator shows the monthly payment, total interest, and total cost (interest + fees). Run it for each quote you receive.

For example, if Lender A offers 6.0% with $5,000 fees and Lender B offers 5.75% with $8,000 fees on a $200,000 balance, the calculator shows:

  • Lender A: payment ≈ $1,199, total interest ≈ $231,676, total cost ≈ $236,676
  • Lender B: payment ≈ $1,167, total interest ≈ $220,000, total cost ≈ $228,000

Even though Lender B has higher fees, the lower rate saves more in interest over 30 years, making it the cheaper loan overall.

Frequently Asked Questions

Should I compare APR or interest rate?

Compare both. The interest rate determines your monthly payment, while the APR includes most fees and reflects the true annual cost. A loan with a lower APR is generally cheaper, but check the fees to understand why.

How many quotes should I get?

Getting 3–5 quotes is common. More quotes can help you find the best deal, but too many can be time-consuming. The key is to compare the same loan structure (term, type, amount) across lenders.

What is a no-closing-cost refinance?

It’s a loan where the lender covers the closing costs in exchange for a higher interest rate. The calculator shows that a higher rate increases total interest, so you may pay more over time even though you pay nothing upfront.

Can I negotiate with lenders after getting quotes?

Yes, you can share a competitor’s Loan Estimate with a lender and ask if they can match or beat it. Lenders sometimes lower fees or rates to win your business.

How long does it take to get a refinance quote?

Most lenders provide a quote within a few minutes online or over the phone, but a formal Loan Estimate typically takes a few business days after you submit an application.

What if I have a variable-rate mortgage?

This calculator assumes a fixed rate. For an adjustable-rate refinance, the payment can change over time, so compare the initial rate and the maximum possible rate, and use the calculator with the initial rate as a baseline.

The result from this calculator is an estimate based on the numbers you enter. Your lender’s Loan Estimate will provide the exact figures for your specific situation.

Related

Formula used
in p | Current loan balance | $ | 200000 | 1 | 100000000
in apr | New interest rate (APR) | % | 6 | 0.01 | 100
in yrs | New loan term | years | 30 | 1 | 50
in fees | Total closing costs | $ | 5000 | 0 | 1000000
out pmt | New monthly payment | $ | p * (apr / 1200) / (1 - (1 + apr / 1200) ^ -(yrs * 12)) | 2
out int | Total interest (new loan) | $ | pmt * yrs * 12 - p | 2
out total | Total cost (interest + fees) | $ | int + fees | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.

More in this section

The whole Loan payments section →