calculate-loan

01 Loan payments

Fuel Costs Except for Motor Vehicles?

Calculator No. 01-27310 · Updated · Formula and assumptions shown below

Monthly fuel cost $350.00
Useful BTU delivered
7,296,000 BTU
Result, rounded to a whole number
Cost per million BTU
$38.38
= Fuel price per unit × 1000000 ÷ fuel energy content (btu per unit)
Fuel price per unit
$3.50
Input
You enter
Fuel price per unit ($), Fuel energy content (BTU per unit) (BTU), Appliance efficiency (%), Monthly fuel usage (units)
You get
Monthly fuel cost ($), Useful BTU delivered (BTU), Cost per million BTU ($)
Rounding
2 dp · 0 dp

Estimate for education, not financial advice. The result follows from the numbers you enter and the formula shown. It is not a quote or an offer, and it does not include fees, taxes or insurance unless the calculator asks for them. Ask your lender for the exact figures.

Fuel costs except for motor vehicles cover the price of energy used for heating, cooking, electricity generation, and industrial processes—such as natural gas, heating oil, propane, kerosene, and coal. This article explains what these fuels are, how their prices are set, how to estimate your own non-vehicle fuel spending, and common pitfalls when comparing them.

Formula

The core formula for any fuel cost is simple: Monthly cost = price per unit × units used. But to compare different fuels, you need the cost per unit of energy, typically per million BTU (MMBTU). The formula is:

Cost per MMBTU = (Price per unit × 1,000,000) ÷ Energy content (BTU per unit)

Variables:

  • Price per unit ($) – what you pay per gallon, therm, cubic foot, or ton.
  • Energy content (BTU per unit) – how much heat one unit releases when burned. Common values: natural gas ≈ 1,000 BTU per cubic foot or 100,000 BTU per therm; propane ≈ 91,500 BTU per gallon; heating oil ≈ 138,500 BTU per gallon; electricity ≈ 3,412 BTU per kWh.
  • Efficiency (%) – the fraction of that heat that actually warms your space or water. A 80% furnace delivers 80,000 BTU per 100,000 BTU of fuel.

The calculator above lets you enter your local price, the fuel’s energy content, your appliance’s efficiency, and your monthly usage to get both your dollar cost and the useful energy delivered.

Worked Example

Using the defaults: price per unit = $3.50, energy content = 91,200 BTU (propane), efficiency = 80%, monthly usage = 100 units (gallons).

  1. Monthly cost = 3.50 × 100 = $350.00
  2. Useful BTU = 91,200 × 100 × 0.80 = 7,296,000 BTU
  3. Cost per MMBTU = (3.50 × 1,000,000) ÷ 91,200 = $38.38

The calculator’s first output shows $350.00, matching the step-by-step result.

Assumptions

  • Fuel price is constant over the month; real bills may vary with market rates.
  • Energy content is a typical average; actual values vary slightly by season and supplier.
  • Efficiency is steady-state; real appliances cycle on/off and lose heat through ducts or vents.
  • No delivery fees, taxes, equipment maintenance, or environmental charges are included—those can add 10–30% to a bill.

Background: What Counts as “Fuel” Outside Vehicles?

When people say “fuel costs,” they often think of gasoline or diesel. But households and businesses pay for many other fuels. The most common are:

  • Natural gas – piped to homes for furnaces, water heaters, stoves, and dryers. Billed in therms or cubic feet.
  • Heating oil – delivered by truck to tanks in the Northeast US and rural areas. Billed per gallon.
  • Propane – stored in tanks, used for heating, cooking, and grills. Billed per gallon.
  • Kerosene – used for space heaters and some older furnaces. Billed per gallon.
  • Coal and wood – used for heating in some regions, billed per ton or cord.
  • Electricity – often generated from fossil fuels, so its price reflects fuel costs indirectly. Billed per kWh.

These fuels power the “stationary” side of energy use: keeping buildings warm, heating water, cooking food, and running industrial boilers. In many regions, heating and cooling account for over half of a home’s energy bill, so non-vehicle fuel costs can exceed what you spend on gasoline.

How Fuel Prices Are Set

Unlike gasoline, which has a visible national average, other fuel prices vary widely by region and season. Key factors:

  • Commodity markets – Natural gas and heating oil prices track futures markets. Cold winters or supply disruptions can spike prices.
  • Delivery method – Piped natural gas has a regulated delivery charge; propane and heating oil are delivered by truck, so distance and tank size matter.
  • Seasonality – Heating oil and propane are often pricier in winter; natural gas prices may rise with demand.
  • Local taxes and fees – State and municipal taxes, plus utility surcharges, are added to the base price.
  • Supplier competition – In deregulated markets, you can choose a supplier; in others, a single utility sets the rate.

To get your actual price, read your bill or call your supplier—don’t rely on national averages, which can differ by 50% or more from your local rate.

How to Estimate Your Non-Vehicle Fuel Costs

If you don’t have a bill in front of you, you can estimate using your home’s size and climate. A rough rule: an average US home uses about 50–100 MMBTU per year for heating and hot water. Multiply that by your cost per MMBTU (from the calculator) to get an annual figure. For example:

  • If you use 80 MMBTU/year and pay $20 per MMBTU, that’s $1,600/year.
  • If you use the same energy but pay $38 per MMBTU (as in the example), it’s $3,040/year.

To refine, check your past bills for 12 months and divide by the number of units used. That gives your average price per unit. Then multiply by your expected usage for the coming year, adjusting for weather.

Comparing Fuels: Why Cost per BTU Matters

Comparing prices per gallon or per therm is misleading because fuels have different energy densities. For instance, heating oil has about 1.5 times the BTU per gallon of propane. So even if heating oil costs more per gallon, it may be cheaper per BTU. The calculator’s “cost per MMBTU” output lets you compare apples to apples.

Efficiency also matters. An old 70% furnace wastes 30% of the fuel’s energy. A new 95% condensing furnace uses less fuel for the same heat. When comparing fuels, always divide the cost per MMBTU by the appliance efficiency (as a decimal). For example, a fuel costing $25/MMBTU at 80% efficiency effectively costs $31.25 per useful MMBTU.

Common Mistakes and Misconceptions

  • Mixing up units – Natural gas is billed in therms (100,000 BTU) or CCF (100 cubic feet, about 100,000 BTU). Propane is per gallon (91,500 BTU). Don’t compare a therm price to a gallon price directly.
  • Ignoring efficiency – Two furnaces using the same fuel can have very different operating costs.
  • Forgetting fixed charges – Most gas bills have a base charge even if you use zero fuel. That makes small users pay more per BTU.
  • Assuming electricity is “fuel-free” – Electricity generation often uses coal or natural gas, and its price includes those fuel costs plus transmission losses.
  • Using peak vs. average prices – Your bill may show a “price to compare” that excludes delivery. Use the total price per unit.

Safety and Practical Considerations

Handling non-vehicle fuels carries real risks. Propane and natural gas are flammable and can leak; heating oil can spill and contaminate soil; kerosene heaters require ventilation. Always:

  • Install carbon monoxide detectors near any fuel-burning appliance.
  • Keep flammable liquids in approved containers, away from ignition sources.
  • Have furnaces and water heaters inspected annually by a qualified technician.
  • Know how to shut off your gas supply at the meter.
  • If you smell gas, leave the area immediately and call your utility from outside.

These safety steps are not part of the calculator, but they are essential for anyone using these fuels.

Frequently Asked Questions

Is natural gas cheaper than electricity for heating? Generally, yes, because natural gas has a lower cost per BTU than electricity in most regions. However, electric heat pumps can be more efficient than gas furnaces, so the comparison depends on your local rates and equipment efficiency.

How do I find my fuel’s BTU content? Your utility bill or supplier’s website often lists it. For standard fuels, use: natural gas 1,000 BTU/cubic foot or 100,000 BTU/therm; propane 91,500 BTU/gallon; heating oil 138,500 BTU/gallon; electricity 3,412 BTU/kWh.

Why is my heating oil bill higher than my neighbor’s even though we have the same house? Differences come from thermostat settings, insulation, furnace efficiency, and the number of occupants. Also, your price per gallon may differ if you bought on a different day.

Can I use this calculator for wood or coal? Yes, if you know the price per ton or cord and the BTU content (about 20–30 million BTU per cord of hardwood, and 12–15 million BTU per ton of coal). Efficiency for wood stoves is typically 50–70%.

What is a “therm” and how does it relate to cubic feet? A therm is 100,000 BTU. Natural gas is often billed in therms, but meters read in cubic feet. One therm equals about 100 cubic feet (CCF) of natural gas.

Does the calculator include delivery or taxes? No, it only multiplies the price you enter by usage. Your actual bill will include fixed charges, taxes, and possibly a delivery fee. Check your bill for the “total price per unit” to get an accurate estimate.

This calculator gives an estimate for educational purposes; your actual fuel bill will show the exact charges from your supplier.

Related

Formula used
in p | Fuel price per unit | $ | 3.50 | 0.01 | 1000
in btu | Fuel energy content (BTU per unit) | BTU | 91200 | 1000 | 200000
in eff | Appliance efficiency | % | 80 | 1 | 100
in use | Monthly fuel usage | units | 100 | 0 | 100000
out cost | Monthly fuel cost | $ | p * use | 2
out btu_used | Useful BTU delivered | BTU | btu * use * eff / 100 | 0
out cost_per_mmbtu | Cost per million BTU | $ | p * 1000000 / btu | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.

More in this section

The whole Loan payments section →