A debt avalanche vs. debt snowball calculator estimates how long it may take to repay several debts and how much interest you may pay under either payoff order. Enter each balance, APR, and minimum payment, plus the extra amount available each month; compare the projected payoff time and interest for both methods.
Formula
A reliable comparison requires applying interest and payments month by month, moving each paid-off debt’s payment to the next target. The calculator block above is a simplified screening estimate: it uses each balance’s current monthly interest and minimum-payment reduction to estimate months, then estimates interest from total payments less starting balances. It does not model changing balances or the avalanche and snowball payment order. Therefore its two payoff-month outputs are identical, and its interest outputs are rough rather than true strategy comparisons. Use an amortization calculator or spreadsheet that simulates each account to compare the methods accurately.
- Monthly interest estimate = balance × APR ÷ 1,200, where APR is entered as a percentage per year.
- Estimated months per debt = balance ÷ (minimum payment − estimated monthly interest), when that difference is positive.
- Displayed payoff months = the rounded-up, longer of the two per-debt estimates.
- Estimated interest = (sum of minimum payments + extra payment) × estimated months − sum of starting balances, with negative results limited to zero.
Here, b1 and b2 are balances in dollars; a1 and a2 are APR percentages; m1 and m2 are monthly minimum payments in dollars; and ex is extra monthly payment in dollars. The outputs av and sn are estimated months, while ai and si are estimated dollars of interest. Because the block’s formula does not reorder payments, these output labels must not be taken as a meaningful comparison of avalanche against snowball.
Worked Example
Using the defaults, Debt 1 has a $5,000 balance, 18% APR, and $150 minimum; Debt 2 has a $2,000 balance, 12% APR, and $75 minimum; extra payment is $100.
- Debt 1 estimated monthly interest: $5,000 × 18 ÷ 1,200 = $75. Its estimated monthly balance reduction is $150 − $75 = $75; $5,000 ÷ $75 = 66.67 months.
- Debt 2 estimated monthly interest: $2,000 × 12 ÷ 1,200 = $20. Its estimated reduction is $75 − $20 = $55; $2,000 ÷ $55 = 36.36 months.
- The longer estimate is 66.67 months, rounded up to 67. The avalanche and snowball estimates are both 67 months.
- Total monthly payments entered are $150 + $75 + $100 = $325. Estimated interest is $325 × 67 − $7,000 = $14,775 for either output.
This illustration demonstrates the block’s arithmetic, not a credible forecast of the actual payoff. In a real payoff schedule, interest falls as balances shrink, minimum payments may change, and the extra amount is redirected as accounts are cleared. Those effects make a month-by-month calculation essential.
Assumptions
- Balances and minimum payments are treated as fixed inputs; APR is assumed not to change.
- Interest is approximated monthly as balance × APR ÷ 12; actual posting and payment dates can differ.
- The extra payment is assumed to be available every month in addition to both minimums.
- Fees, new purchases, missed payments, changing minimums, promotional rates, and payment-allocation rules are not included.
How Avalanche and Snowball Work
Both methods keep minimum payments current on every debt and direct extra money to one selected balance. Once that balance is paid, the amount previously sent to it is added to the payment on the next target. This rollover means the total debt-payment budget can stay constant while the target changes.
- Avalanche: target the debt with the highest APR first. This prioritizes the balance accruing interest fastest, all else equal.
- Snowball: target the smallest balance first, regardless of APR. Clearing an account sooner can create a visible milestone and free its payment for another debt.
For example, with a $5,000 debt at 18% and a $2,000 debt at 12%, avalanche targets the $5,000 balance first, while snowball targets the $2,000 balance. Both still receive their required minimum payments. Which order produces a lower interest total depends on the balances, rates, minimums, extra payment, and timing; a faithful schedule is needed to quantify the difference.
What a Useful Comparison Needs
A strategy comparison should calculate each account’s interest from its changing balance, apply payments in the chosen order, and repeat until every balance reaches zero. For each month it should:
- Calculate interest on each remaining balance using its APR and the period’s timing.
- Apply at least the required minimum to every debt, without paying more than the amount owed.
- Send the remaining budget to the current target: highest APR for avalanche or smallest balance for snowball.
- When a debt is cleared, redirect its available payment to the next target and continue.
- Report total interest, total repayment time, and any final partial payment separately.
Use the same debts, monthly budget, and assumptions for both runs. Otherwise, the comparison may reflect different payment amounts rather than the payoff order. Check whether a calculator assumes a fixed minimum payment or recalculates it as a percentage of the balance; that assumption can change results.
Common Calculator Problems and Limits
- Payment does not cover interest: If a payment is no greater than monthly interest, the balance may not decline. A simple division formula can produce misleading results or fail to represent the debt’s actual terms.
- Rates and periods are mixed: An APR entered as 18 means 18%, not 0.18; converting annual APR to an approximate monthly rate requires dividing by 12.
- Rounding changes the final month: Real statements round interest and payments to cents. Small monthly differences can shift a payoff date, especially over a long schedule.
- Balances are incomplete: New charges, fees, variable rates, deferred interest, or missed payments can make projections diverge from statements.
- Minimums change: Some repayment arrangements recalculate minimums as balances fall. A fixed-payment estimate may then overstate or understate time and interest.
Do not interpret this page’s simplified outputs as evidence that one method saves a specific amount over the other. For that, use a true monthly simulation with the account terms and payment rules, or check the result against creditor statements. This arithmetic is educational and is not financial advice.
Frequently Asked Questions
Which method usually pays less interest?
Avalanche directs extra payments to the highest APR first, which generally reduces interest when all other conditions and payment totals are the same. The amount saved depends on the actual schedule; calculate it month by month.
Does the snowball method ignore interest?
No. Interest still accrues on every unpaid balance, and minimums still need to be paid. Snowball describes only which debt receives the extra payment first: the smallest balance.
Can I use both methods?
Yes. A person can change target order, for example after clearing a small balance or if a rate changes. To compare outcomes, run each proposed order with identical balances, rates, and total monthly payment assumptions.
What if my minimum payment is less than the interest?
The balance may grow rather than shrink, depending on the account’s terms and charges. A calculator should flag this situation instead of presenting a normal payoff date; review the statement and contact the creditor for the applicable payment information.
Does paying extra reduce the APR?
No. An extra payment can reduce the balance on which future interest is calculated, but it does not itself change the stated APR. Rates and payment rules may change only under the account’s terms.
The result is an estimate, and the lender’s disclosure gives the exact figures.
Related
Formula used
in b1 | Debt 1 balance | $ | 5000 | 0 | 100000000 in a1 | Debt 1 APR | % | 18 | 0 | 100 in m1 | Debt 1 minimum payment | $ | 150 | 0 | 1000000 in b2 | Debt 2 balance | $ | 2000 | 0 | 100000000 in a2 | Debt 2 APR | % | 12 | 0 | 100 in m2 | Debt 2 minimum payment | $ | 75 | 0 | 1000000 in ex | Extra monthly payment | $ | 100 | 0 | 1000000 out av | Avalanche payoff months (estimate) | months | ceil(max(b1 / max(m1 - b1 * a1 / 1200, 0.01), b2 / max(m2 - b2 * a2 / 1200, 0.01))) | 0 out sn | Snowball payoff months (estimate) | months | ceil(max(b1 / max(m1 - b1 * a1 / 1200, 0.01), b2 / max(m2 - b2 * a2 / 1200, 0.01))) | 0 out ai | Avalanche interest estimate | $ | max(0, (m1 + m2 + ex) * av - b1 - b2) | 2 out si | Snowball interest estimate | $ | max(0, (m1 + m2 + ex) * sn - b1 - b2) | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.
More in this section
- Debt-to-Income Calculator: Formula and Example30.00 %
- Debt-to-Income Calculator: How to Calculate Your DTI30.00 %
- Debt-to-Income Calculator: How to Calculate DTI30.00 %
- Debt-to-Income Calculator: How to Calculate DTI30.00 %
- Debt-to-Income Ratio: Is High Income a Problem?25.00 %
- Debt Routine Amount for Q1: How to Calculate It