calculate-loan

01 Loan payments

Compare Current Home Loan Interest Savings

Calculator No. 01-27399 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

Estimate for education, not financial advice. The result follows from the numbers you enter and the formula shown. It is not a quote or an offer, and it does not include fees, taxes or insurance unless the calculator asks for them. Ask your lender for the exact figures.

This calculator works out how much total interest you would pay on a home loan at two different interest rates, so you can see the dollar savings from a lower rate. You enter the loan amount, the current rate, the new or competing rate, and the remaining term, and it returns the monthly payment and total interest for each, plus the difference in interest paid. The result is an estimate based on the inputs you provide; your lender’s disclosure gives the exact figures.

Formula

The monthly payment for a fixed-rate loan is calculated with the standard amortization formula:

M = P × (r / 1200) / (1 − (1 + r / 1200)^(−n))

Where:

  • M = monthly payment (in dollars)
  • P = loan principal (in dollars)
  • r = annual interest rate (APR, in percent per year)
  • n = total number of monthly payments (years × 12)

Total interest is then M × n − P. The savings figure is simply the total interest at the current rate minus the total interest at the new rate. The formula assumes a fixed rate for the entire term, level payments, and monthly compounding at APR/12.

Worked Example

Using the default values from the calculator: loan amount $200,000, current rate 6.5%, new rate 5.5%, term 30 years.

  1. Convert annual rates to monthly: 6.5/1200 = 0.00541667; 5.5/1200 = 0.00458333.
  2. Number of payments: 30 × 12 = 360.
  3. Payment at 6.5%: 200000 × 0.00541667 / (1 − (1.00541667)^−360) = 1264.14 (rounded to cents).
  4. Payment at 5.5%: 200000 × 0.00458333 / (1 − (1.00458333)^−360) = 1135.58.
  5. Total interest at 6.5%: 1264.14 × 360 − 200000 = 255,090.40.
  6. Total interest at 5.5%: 1135.58 × 360 − 200000 = 208,808.80.
  7. Interest savings: 255,090.40 − 208,808.80 = 46,281.60.

The calculator shows the same numbers: payment at current rate $1,264.14, payment at new rate $1,135.58, total interest at current rate $255,090.40, total interest at new rate $208,808.80, and interest savings $46,281.60.

Assumptions

  • Fixed interest rate for the entire term; adjustable-rate loans would change the payment.
  • Payments are made at the end of each month.
  • Interest compounds monthly at APR/12.
  • No fees, closing costs, points, private mortgage insurance (PMI), property taxes, or insurance are included.
  • The loan term is the same for both rates; if you shorten the term, the savings calculation changes.

How to Use This Comparison

This calculator is useful when you are evaluating a refinance offer or comparing two loan quotes with the same term. You enter the remaining balance (not the original loan amount), the rate you currently pay, the rate you are considering, and the number of years left on the loan. The output shows the monthly payment difference and the total interest savings over the remaining term.

To get a realistic figure, use the exact remaining balance from your latest statement. For a refinance, the new loan often has a new term (for example, 30 years) even if you have already paid 10 years on the old loan. In that case, enter the new term in the calculator, not the remaining years of the old loan. The calculator compares the two scenarios as if both run for the same number of years you enter.

The interest savings number is the gross reduction in interest paid. It does not subtract the costs of getting the new loan, such as application fees, appraisal fees, title insurance, or points. To see net savings, subtract those costs from the interest savings figure.

Common Mistakes and Misconceptions

  • Using the original loan amount instead of the current balance. The remaining balance is what actually accrues interest going forward.
  • Comparing rates with different terms. A 30-year loan at 5.5% will have lower monthly payments but more total interest than a 15-year loan at 5.0%, even though the rate is higher. Always compare the same term.
  • Ignoring closing costs. A lower rate may come with high upfront fees that take many years to recoup through interest savings.
  • Assuming the rate is the only factor. The APR includes some fees, but not all costs like title insurance or escrow.
  • Forgetting that prepayment changes the math. If you plan to pay extra each month, the actual interest savings will be different.

When Interest Savings Matter Most

Interest savings are most meaningful when you plan to stay in the home and keep the loan for a long time. The longer the remaining term, the larger the impact of a rate difference. For example, on a $200,000 loan, a 1% rate difference over 30 years saves about $46,000 in interest, as shown above. Over 15 years, the same rate difference saves roughly $19,000.

If you expect to move or refinance again within a few years, the total interest savings will be much smaller, because you only pay interest for the time you actually hold the loan. In that case, the monthly payment reduction may be more relevant than the total interest figure.

Also consider that the savings are nominal dollars, not adjusted for inflation. The real value of those future savings will be lower due to inflation. However, for comparing loan offers, the nominal figure is the standard measure.

How to Choose Between Rates

When comparing two loan offers, look at the APR, which includes the interest rate plus certain lender fees, but verify what is included. Use this calculator to see the interest savings, then subtract the estimated closing costs to get net savings. If the net savings is positive and you plan to stay long enough to recover the costs, the lower rate may be financially beneficial, but that is a personal decision based on your cash flow and plans.

Remember that a lower rate is not always the best choice if it requires paying many points or if you cannot afford the higher closing costs. Some lenders offer a higher rate with a lender credit that covers closing costs, which could be better if you plan to refinance again soon. The calculator does not model these trade-offs; it only shows the interest arithmetic.

Limitations of This Calculator

This calculator assumes a fixed-rate loan with level payments. It does not model adjustable-rate mortgages (ARMs), interest-only periods, or balloon payments. It also does not account for extra payments, which would reduce the total interest and shorten the term. The savings figure is the difference in total interest paid over the full term, assuming you make exactly the minimum payment each month.

For a refinance, the actual new loan may have a different term, and you may pay closing costs that are financed into the loan amount, which would increase the principal. If you roll fees into the loan, enter the new loan amount (original balance plus fees) as the loan amount to see the true comparison. This calculator does not handle that automatically.

Finally, the result is an estimate based on the inputs you provide. The lender’s disclosure gives the exact figures for any specific loan offer.

Frequently Asked Questions

How much can I save by refinancing from 6.5% to 5.5%?

On a $200,000, 30-year loan, the interest savings would be about $46,000 as shown in the example. Your actual savings depend on your balance, remaining term, and the exact rates. Use the calculator with your numbers to get a personal estimate.

Should I refinance if the new rate is only 0.5% lower?

It depends on your closing costs and how long you plan to stay. A 0.5% drop on a $200,000, 30-year loan saves about $21,000 in interest over the full term. If closing costs are $5,000, you would break even after about 2-3 years of lower payments. The calculator can show the interest savings; subtract your costs to see net savings.

Does the calculator include closing costs?

No. The calculator only computes interest and payments. Closing costs, points, and fees are not included. You need to subtract those costs from the interest savings to get net savings.

What if I have an adjustable-rate mortgage (ARM)?

This calculator assumes a fixed rate for the entire term. For an ARM, the payment can change after the initial fixed period, so the total interest cannot be predicted with a single rate. Use the current rate as an input for a rough estimate, but understand the actual savings may differ.

Can I use this calculator for a home equity loan or HELOC?

Yes, for a fixed-rate home equity loan, the same formula applies. For a HELOC, the rate is variable and you may have interest-only payments, so this calculator would not be accurate. Use it only for fixed-rate loans.

The result is an estimate and the lender’s disclosure gives the exact figures.

Related

Formula used
in p | Loan amount | $ | 200000 | 1 | 100000000
in r1 | Current rate (APR) | % | 6.5 | 0.01 | 100
in r2 | New/competing rate (APR) | % | 5.5 | 0.01 | 100
in yrs | Remaining term | years | 30 | 0.0833 | 50
out pmt1 | Payment at current rate | $ | p * (r1 / 1200) / (1 - (1 + r1 / 1200) ^ -(yrs * 12)) | 2
out pmt2 | Payment at new rate | $ | p * (r2 / 1200) / (1 - (1 + r2 / 1200) ^ -(yrs * 12)) | 2
out int1 | Total interest at current rate | $ | pmt1 * yrs * 12 - p | 2
out int2 | Total interest at new rate | $ | pmt2 * yrs * 12 - p | 2
out save | Interest savings | $ | int1 - int2 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.

More in this section

The whole Loan payments section →