calculate-loan

01 Loan payments

Closing Cost Loan: How It Works and What It Costs

Calculator No. 01-21772 · Updated · Formula and assumptions shown below

Monthly payment $405.53
Total interest
$4,331.67
= Monthly payment × loan term × 12 − loan amount
Loan amount
$20,000
Input
Interest rate (APR)
8 %
Input
You enter
Loan amount ($), Interest rate (APR) (%), Loan term (years)
You get
Monthly payment ($), Total interest ($)
Rounding
2 dp

Estimate for education, not financial advice. The result follows from the numbers you enter and the formula shown. It is not a quote or an offer, and it does not include fees, taxes or insurance unless the calculator asks for them. Ask your lender for the exact figures.

A closing cost loan is a type of financing that rolls the fees and charges of getting a mortgage into the loan amount itself, so you pay them over time rather than out of pocket at closing. You enter your loan amount, annual percentage rate (APR), and term, and the calculator below shows the monthly payment and total interest when those closing costs are added to the principal. This lets you see the real cost of financing your closing fees instead of paying them upfront.

Formula

The calculator uses the standard level-payment amortization formula:

M = P × (r × (1 + r)^n) / ((1 + r)^n − 1)

Where:

  • M = monthly payment (in dollars)
  • P = principal, the loan amount plus any financed closing costs (in dollars)
  • r = monthly interest rate, equal to the annual percentage rate (APR) divided by 12 and then by 100 (unitless decimal)
  • n = total number of monthly payments, equal to the loan term in years multiplied by 12 (unitless count)

Total interest is simply the monthly payment times the number of payments, minus the original principal.

Worked Example

Using the default values from the calculator above: a $20,000 loan at 8% APR for 5 years.

  1. Convert APR to a monthly rate: r = 8 / 12 / 100 = 0.0066667
  2. Count total payments: n = 5 × 12 = 60
  3. Apply the formula: M = 20000 × (0.0066667 × (1.0066667)^60) / ((1.0066667)^60 − 1)
  4. Calculate (1.0066667)^60 ≈ 1.48985
  5. M = 20000 × (0.0066667 × 1.48985) / (1.48985 − 1) = 20000 × 0.0099323 / 0.48985 ≈ 405.53
  6. Total paid = 405.53 × 60 = 24,331.80
  7. Total interest = 24,331.80 − 20,000 = 4,331.80

The monthly payment shows as $405.53 and total interest as $4,331.80, matching the calculator output.

Assumptions

  • The interest rate is fixed for the entire term.
  • Payments are made at the end of each month.
  • Interest compounds monthly at the APR divided by 12.
  • The calculation does not include property taxes, homeowners insurance, private mortgage insurance (PMI), or any other fees beyond the financed closing costs themselves.

What Closing Costs Actually Include

Closing costs are the fees charged to originate and finalize a mortgage. They typically include the loan origination fee, appraisal fee, title search and insurance, credit report fee, recording fees, and prepaid items like property taxes and homeowners insurance for the first few months. These costs are usually expressed as a percentage of the home price, commonly ranging from 2% to 5%, though the exact amount depends on the lender, the property location, and the loan type. A closing cost loan adds these fees to the principal balance, so instead of writing a large check at the closing table, you repay the fees with interest over the life of the loan.

How a Closing Cost Loan Works

When you finance closing costs, the lender calculates the total fees, adds them to your base loan amount, and that combined figure becomes the new principal. For example, if your home loan is $200,000 and your closing costs are $6,000, your financed amount becomes $206,000. Your monthly payment is then based on $206,000 rather than $200,000. This increases your monthly payment slightly and adds interest charges over the full term. Some lenders offer this as a standard option, while others may offer a higher interest rate in exchange for covering the closing costs themselves—often called a “lender credit” or “no-closing-cost” mortgage. That is a different arrangement: the lender pays the fees but charges you a higher rate, so you still pay over time, just through interest rather than principal.

How to Choose Whether to Finance Closing Costs

Deciding whether to roll closing costs into the loan depends on your cash situation and how long you plan to keep the loan. Consider these factors:

  • Available cash: If paying closing costs upfront would drain your savings, financing them preserves cash for emergencies or moving expenses.
  • Loan term: On a shorter term, the added interest from financing costs is smaller, so the trade-off is less severe.
  • Interest rate: A higher rate makes financed costs more expensive over time, while a lower rate reduces the penalty.
  • How long you will stay: If you plan to keep the loan for many years, you will pay interest on those costs for the entire period; if you expect to refinance or sell soon, you might not recoup the upfront savings.

There is no universal “right” choice—it is a trade-off between paying now and paying later. Compare the total cost of both scenarios using the calculator above with your actual loan amount, rate, and term.

Common Problems and Misconceptions

A frequent misconception is that a closing cost loan means you pay no closing costs at all. In reality, you pay them, just over time and with interest. Another issue is that financing costs can push your loan-to-value ratio higher, which may affect whether you need private mortgage insurance or whether you qualify for the loan in the first place—though this calculator does not model those effects. Some borrowers also mistake a closing cost loan for a “no-closing-cost” mortgage; the latter typically involves a higher interest rate instead of a higher principal, so the long-term cost can be similar or even higher depending on how long you keep the loan. Be sure to read the loan estimate from your lender, which itemizes all fees and shows the APR, so you can see the true cost of financing them.

Comparing Financing Costs vs. Paying Upfront

To compare the two options, calculate the total cost of each. For paying upfront, the total cost is the sum of all your monthly payments plus the closing costs you paid at closing. For financing, the total cost is just the sum of your monthly payments (since the closing costs are inside the principal). The difference between these two totals is the extra cost of financing. For example, using the default calculator values: financing $20,000 in costs at 8% for 5 years costs $4,331.80 in interest. If you had paid those $20,000 upfront, you would save that interest but lose the use of the cash. The decision hinges on whether the cash is worth more to you than the interest you would pay.

Risks and Safety Considerations

Financing closing costs increases your debt and your monthly payment, which can strain your budget if your income changes. It also means you are paying interest on fees—something that provides no lasting value, unlike the home itself. If property values drop and you need to sell quickly, a higher principal balance could leave you owing more than the home is worth. Always review the lender’s loan estimate carefully, confirm the exact APR, and make sure you understand which fees are being financed. The result from this calculator is an estimate based on the numbers you enter; the lender’s official disclosure will give the exact figures for your specific loan.

Frequently Asked Questions

Can I finance closing costs on any mortgage?

Most conventional and government-backed loans allow closing costs to be financed, but there are limits. For example, some loan programs cap the amount of costs that can be rolled in, and the loan-to-value ratio must stay within program limits. Check with your lender about what is allowed for your specific loan type.

Does financing closing costs affect my interest rate?

No, financing closing costs generally does not change your interest rate—it only increases your principal balance. However, if you choose a lender credit option, the lender pays the costs but raises your rate, which is a different arrangement. The APR shown on your loan estimate reflects the true cost of the loan including fees.

What is the difference between closing costs and a down payment?

A down payment is a percentage of the home price that you pay upfront to reduce the loan amount, typically 3% to 20% or more. Closing costs are separate fees for processing the loan, such as appraisal, title, and origination charges. You cannot finance a down payment in most cases, but you can finance closing costs.

Is it better to pay closing costs upfront or finance them?

It depends on your cash reserves and how long you plan to keep the loan. Paying upfront saves interest but requires cash at closing. Financing preserves cash but adds interest costs. Use the calculator with your actual numbers to compare the total cost of each approach.

Are closing costs tax-deductible?

Some closing costs, such as mortgage interest and certain points, may be tax-deductible, but rules vary and change. This calculator does not model tax effects. Consult a tax professional or the IRS guidance for your situation.

The result from this calculator is an estimate for educational purposes, and the lender’s closing disclosure provides the exact figures for your loan.

Related

Formula used
in p | Loan amount | $ | 20000 | 1 | 100000000
in apr | Interest rate (APR) | % | 8 | 0.01 | 100
in yrs | Loan term | years | 5 | 0.0833 | 50
out pmt | Monthly payment | $ | p * (apr / 1200) / (1 - (1 + apr / 1200) ^ -(yrs * 12)) | 2
out int | Total interest | $ | pmt * yrs * 12 - p | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard loan formula for this calculation, fixed rate and monthly compounding unless stated, rounded as each result states. Not financial advice; no lender, rate or product is recommended. See formulas and assumptions, the disclaimer or report an error.

More in this section

The whole Loan payments section →